Some tips on 3-Cyanobenzyl alcohol

The synthetic route of 3-Cyanobenzyl alcohol has been constantly updated, and we look forward to future research findings.

Related Products of 874-97-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 874-97-5, name is 3-Cyanobenzyl alcohol belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

E4 3-(((2,2-dimethyl-5-oxo-l,2,3,5-tetrahydroimidazo[l,2-c]pyrimidin-7-yl)oxy)methyl)benzo- nitrile To a solution of 7-chloro-2,2-dimethyl-l-(methylsulfonyl)-2,3-dihydroimidazo[l,2-c]pyrimidin- 5(lH)-one (200 mg, 0.720 mmol) and 3-(hydroxymethyl)benzonitrile (288 mg, 2.16 mmol) in N,N- dimethylformamide (DMF) (3.5 mL) was added K2C03 (299 mg, 2.16 mmol). The reaction mixture was sealed in a microwave vial and irradiated with a microwave using initial normal to 100 C for 1 h. Purification via mass -directed auto-preparation afforded the title product as a white solid. LCMS (ESI): m/z 297 [M + H]+; 2.24 min (ret time)

The synthetic route of 3-Cyanobenzyl alcohol has been constantly updated, and we look forward to future research findings.

New downstream synthetic route of 3-Cyanobenzyl alcohol

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 874-97-5, name is 3-Cyanobenzyl alcohol, A new synthetic method of this compound is introduced below., SDS of cas: 874-97-5

1-methyl-3-[(3-cyanophenylmethoxy)methyl]-2(1H)-pyridinone, 12a. To a 0 C suspension of sodium hydride (41 mg, 60% suspension in mineral oil, 1.01 mmol), in THF (3 mL) was added 3-cyanobenzyl alcohol (100 mg, 0.75 mmol). After the mixture was stirred for 1 h at 0 C, 3-(bromomethyl)-1-methylpyridin-2(1H)-one3 (152 mg, 0.75 mmol) in THF (3mL) was added dropwise. The reaction mixture was slowly allowed to warm to room temperature and stirred for additional 3 h before diluting with saturated aqueous ammonium chloride. After extraction with ethyl acetate, the combined organics were washed with brine, concentrated invacuo and purified by column chromatography using 5:95 MeOH/DCM to get title compound as a colorless soild (136 mg, 71 %).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Khatri, Buddha B.; Vrubliauskas, Darius; Sieburth, Scott McN.; Tetrahedron Letters; vol. 56; 30; (2015); p. 4520 – 4522;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Continuously updated synthesis method about 3-Cyanobenzyl alcohol

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Cyanobenzyl alcohol, other downstream synthetic routes, hurry up and to see.

Reference of 874-97-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 874-97-5, name is 3-Cyanobenzyl alcohol belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Procedure 2: In a vial the acid (1.32 mmol), dicyclohexylcarbodiimide (DCC; 1.45 mmol) and the alcohol (1.32 mmol) were dissolved in dry THF (5mL). The reaction mixture was stirred at room temperature overnight, and then filtered. The filtrate was diluted with dichloromethane and washed with water (2x) followed by brine, dried over sodium sulfate and concentrated to a crude residue, which was purified by flash chromatography.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Cyanobenzyl alcohol, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Titchenell, Paul M.; Hollis Showalter; Pons, Jean-Francois; Barber, Alistair J.; Jin, Yafei; Antonetti, David A.; Bioorganic and Medicinal Chemistry Letters; vol. 23; 10; (2013); p. 3034 – 3038;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Some scientific research about 874-97-5

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Cyanobenzyl alcohol, and friends who are interested can also refer to it.

Reference of 874-97-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 874-97-5 name is 3-Cyanobenzyl alcohol, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

3-Cyanobenzyl alcohol (308 mg, 2.32 mmol), N-hydroxyphthalimide (416 mg, 2.55 mmol) and triphenylphosphine (668 mg, 2.55 mmol) were dissolved in THF (8 mL). Diethyl azodicarboxylate (DEAD) (0.40 mL, 2.55 mmol) was added dropwise while stirring to the solution and the reaction mixture was stirred at room temperature for 2 h. The reaction mixture was filtered and the residue washed with THF (4 mL) and dried under high vacuum. The crude product (1.24 g, 4.46 mmol) was dissolved in ethanol (8 mL) and hydrazine monohydrate (0.43 mL, 8.92 mmol) was added. The reaction was refluxed for 2 h and filtered. Ethanol was removed under reduced pressure and the residue suspended in ethyl ether. The ethyl ether layer was washed with 3% Na2CO3 (2*10 mL), brine (10 mL) and concentrated. The crude product (830 mg, 5.61 mmol) was dissolved in THF (15 mL) and cooled to 0 C. Lithium aluminum hydride (1 M in THF, 11.2 mL, 11.2 mmol) was added dropwise and the reaction was stirred overnight at room temperature. It was then quenched with methanol (10 mL) and water (2 mL). The mixture for stirred for a further 30 min. The salts were filtered off and the solvent removed by evaporation in vacuo. The crude product was purified by silica gel flash column chromatography using 20% MeOH/dichloromethane as eluent to afford the desired product as white solid (59 mg, 0.388 mmol, 17% over 3 steps). 1H NMR (CDCl3, 300 MHz): delta (ppm) 4.07 (s, 2H), 4.63 (s, 2H), 5.18 (s, 4H), 7.36-7.44 (m, 4H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 3-Cyanobenzyl alcohol, and friends who are interested can also refer to it.

Reference:
Patent; NEWLINK GENETICS CORPORATION; Mautino, Mario; Jaipuri, Firoz; Marcinowicz-Flick, Agnieszka; Kesharwani, Tanay; Waldo, Jesse; (201 pag.)US10047066; (2018); B2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts