Category: 654-70-6

Adding a certain compound to certain chemical reactions, such as: 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 654-70-6, Recommanded Product: 4-Cyano-3-trifluoromethylaniline

To the reaction kettle, was introduced nitrogen gas, to which were added 4-cyano-3-(trifluoromethyl)phenylamine (200 g), n-heptane (450 mL), and water (500 mL), followed by stirring to produce suspension. Thiophosgene (148 g) was drop added. The mixture was stirred at 40 C. for 16 hours, then stood for liquid separation. The water phase was extracted with n-heptane (500 mL) once, and the organic phase was combined. The solvent was removed by concentrating under reduced pressure, followed by reduced pressure distillation to provide the target compound (220 g), with a yield of 89.8%. 1HNMR (DMSO, 400 MHz): 7.52 (1H, dd, J=1.7, 8.3), 7.60 (1H, d, J=1.7 Hz), 7.87 (1H, d, J=8.3 Hz).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Cyano-3-trifluoromethylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; HINOVA PHARMACEUTICALS INC.; CHEN, Yuanwei; DU, Wu; KUANG, Tongtao; GENG, Xi; (10 pag.)US2020/87261; (2020); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 654-70-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 654-70-6 name is 4-Cyano-3-trifluoromethylaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

1) Preparation of 4-(4,4-dimethyl-2,5-dioxoimidazolidin-1-yl)-2-trifluoromethyl-benzonitrile (1.1); Compound 1.1 can be prepared by method ?N-A?. To this end, 14.74 g (79.21 mmol) of 4-amino-2-trifluoromethylbenzonitrile were dissolved in 200 ml of dry acetonitrile. This solution was added dropwise with stirring to a 20% solution, heated to 70 C., of phosgene in toluene and then stirred for 1 h. The cooled reaction solution was concentrated under reduced pressure, the residue was taken up with toluene and concentrated again under reduced pressure. Finally, the residue was dissolved in 150 ml of dry acetonitrile and the solution was admixed with stirring with 15.5 g (79.21 mmol) of tert-butyl 2-amino-2-methylpropionate hydrochloride. 12.02 g (118.8 mmol) of triethylamine were slowly added dropwise to the reaction mixture which was then stirred at room temperature for 45 min. Thereafter, the mixture was admixed cautiously with 50 ml of concentrated hydrochloric acid and stirred at 70 C. for 1 h. The cooled reaction mixture was concentrated under reduced pressure and the residue was admixed with ethyl acetate and water. The organic phase was removed, washed with saturated sodium hydrogencarbonate solution and then with water, dried over sodium sulfate, filtered and concentrated under reduced pressure. The residue was purified chromatographically using silica gel with 2:1 heptane/ethyl acetate. This afforded 21.2 g (90% yield) of 4-(4,4-dimethyl-2,5-dioxoimidazolidin-1-yl)-2-trifluoromethylbenzonitrile 1.1 with melting point 208-211 C.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Cyano-3-trifluoromethylaniline, and friends who are interested can also refer to it.

Reference:
Patent; SANOFI-AVENTIS; US2011/46105; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Some common heterocyclic compound, 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, molecular formula is C8H5F3N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4-Cyano-3-trifluoromethylaniline

At 0 C, liquid bromine (21.68 g, 135.66 mmol) was slowly added dropwise to a solution of Compound 36a (25.00 g, 134.31 mmol) in methanol (200 mL). After the resulting reaction mixture was further stirred for 0.5 hr, a saturated solution of sodium thiosulfate (200 mL) was added to the reaction system at 0 C to quench the reaction. The resulting mixture was diluted with water (1000 mL), and filtered. The filter cake was washed with water (200 mL×3), and dried under reduced pressure to give Compound 36b (34.30 g). 1H NMR (400 MHz, DMSO-d6) delta8.14 (s, 1H), 7.20 (s, 1H), 6.90 (brs, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 654-70-6, its application will become more common.

Reference:
Patent; Chia Tai Tianqing Pharmaceutical Group Co., Ltd.; Medshine Discovery Inc.; CHEN, Bin; YAO, Yuanshan; CHEN, Yuan; LI, Ao; XU, Ran; HUANG, Zhensheng; TIAN, Dongdong; LI, Hongwei; YANG, Chengshuai; LI, Jian; CHEN, Shuhui; (69 pag.)EP3489235; (2019); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

654-70-6, name is 4-Cyano-3-trifluoromethylaniline, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: nitriles-buliding-blocks

General procedure: A solution of NaHCO3 (0.82 g) in distilled water (4 mL) wasstirred for 10 min and to it was added DCM (4 mL) followed by thedifferent aniline 7e12 (2.4 mmol). The reaction mixture was cooledto 0 C, thiophosgene (0.3 mL, 3.7 mmol) was added dropwise over10 min and the reaction was then stirred at r.t. overnight. Themixture was then diluted with DCM (20 mL), washed with brine(20 mL), the organic layer was dried over Na2SO4 and concentratedto dryness.

The synthetic route of 654-70-6 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Pertusati, Fabrizio; Ferla, Salvatore; Bassetto, Marcella; Brancale, Andrea; Khandil; Westwell, Andrew D.; McGuigan, Christopher; European Journal of Medicinal Chemistry; vol. 180; (2019); p. 1 – 14;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 654-70-6

A mixture of 750 mg of the compound, produced under 7b, and 920 mg of 4-amino-2-(trifluoromethyl)benzonitrile in 10 ml of ethanol was mixed under a nitrogen atmosphere with 0.5 g of an activated molecular sieve (0.3 nm) and stirred for 2 days at 90 C. For working-up, the molecular sieve was filtered off after cooling, washed with ethanol, and the combined ethanol solutions were concentrated by evaporation. The residue was taken up in ethyl acetate and washed with water as well as saturated sodium chloride solution. After drying on sodium sulfate and concentration by evaporation, it was chromatographed on silica gel with ethyl acetate/hexane, and 731 mg of the title compound was thus obtained as a colorless oil. ESI-MS: 320

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 654-70-6.

Reference:
Patent; Schering AG; US2004/9969; (2004); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 654-70-6, Formula: C8H5F3N2

Compound S-III(30.0 g, 164 mmol), 4-cyano-3-trifluoromethylaniline (33.9 g, 182 mmol)Add N, N-methylacetamide (210 mL) to the reaction flask and cool to -15 C in an ice bath.Thionyl chloride (23.0 g, 195 mmol) was added dropwise, and the reaction temperature was controlled to be -10 C to -15 C.After the addition, the mixture was stirred for 0.5 h, and raised to 40 C for 2 h. Pour the reaction solution slowly It was extracted with ethyl acetate (200 mL×3) in cold saturated sodium bicarbonate (60 mL).The organic phase was combined, washed with a saturated aqueous solution of sodium chloride, dried over anhydrous sodium sulfate and filtered.Concentrate to dryness under reduced pressure to give a crude material eluting with petroleum ether and methyl tert-butyl ether Recrystallization of the solution, decolorization of activated carbon, giving a white solidS-IV 42.3 g, yield 73.1%

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Shijiazhuang Du Zhi Pharmaceutical Technology Co., Ltd.; Fang Yu; Du Yumin; (10 pag.)CN109761778; (2019); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 654-70-6, Application In Synthesis of 4-Cyano-3-trifluoromethylaniline

[003 19j Thionyl chloride (46.02 g, 0.39 mol) was added dropwise to a cooled solution (less than 4C) of (R)-3-bromo-2-hydroxy-2-methylpropanoic acid (51.13 g, 0.28 mol) in 300 mL of THF under an argon atmosphere. The resulting mixture was stirred for 3 h under the same condition. To this was added Et3N (39.14 g, 0.39 mol) and stirred for 20 mm under the same condition. After 20mm, 5-amino-2-cyanobenzotrifluoride (40.0 g, 0.21 mol), 400 mL of THF were added and then the mixture was allowed to stir overnight at RT. The solvent was removed under reduced pressure to give a solid which was treated with 300 mL of H20, extracted with EtOAc (2 x400 mL). The combined organic extracts were washed with saturated NaHCO3 solution (2 x 300 mL) and brine (300 mL). The organic layer was dried over MgSO4 and concentrated under reduced pressure togive a solid which was purified from column chromatography using CH2CWEtOAc (80:20) to give a solid. This solid was recrystallized from CH2CWhexane to give 55.8 g (73.9%) of (2R)-3-bromo- N-[4-cyano-3 -(trifluoromethyl)phenylj -2-hydroxy-2-methylpropanamide as a light-yellow solid. Mp 134.0-136.5C;[00320j ?H NMR (CDC13fFMS) oe 1.66 (s, 3H, CH3), 3.11 (s, 1H, OH), 3.63 (d, J= 10.8 Hz, 1H,CH2), 4.05 (d, J= 10.8 Hz, 1H, CH2), 7.85 (d, J= 8.4 Hz, 1H, Ar]), 7.99 (dd, J=2.1, 8.4 Hz, 1H,ArH), 8.12 (d, J = 2.1 Hz, 1H, ArH), 9.04 (bs, 1H, NH). MS (ESI) 349.0 [M – Hj M.p.: 124- 126C.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Cyano-3-trifluoromethylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GTX, INC.; UNIVERSITY OF TENNESSEE RESEARCH FOUNDATION; NARAYANAN, Ramesh; MILLER, Duane D.; PONNUSAMY, Thamarai; HWANG, Dong-Jin; DUKE, Charles B.; COSS, Christopher C.; JONES, Amanda; DALTON, James T.; (159 pag.)WO2016/172330; (2016); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Synthetic Route of 654-70-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, This compound has unique chemical properties. The synthetic route is as follows.

4-Amino-2-trifluoromethylbenzonitrile, (2.23 g, 12 mmol) was added portionwise over15 minutes into the well-stirred heterogeneous mixture of thiophosgene (1 ml, 13 mmol) in water (22 ml) at room temperature. Stirring was continued for an additional 1 h. The reaction medium was extracted with chloroform (3 x 15 ml). The combined organic phase was dried over MgSO4 and evaporated to dryness under reduced pressure to yield desired product, 4-isothiocyanato-2-trifluoromethylbenzonitrile, (Ia), as brownish solid and was used as such for the next step (2.72 g, 11.9 mmol, 99%).

The chemical industry reduces the impact on the environment during synthesis 4-Cyano-3-trifluoromethylaniline. I believe this compound will play a more active role in future production and life.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; WO2006/124118; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 654-70-6 as follows. HPLC of Formula: C8H5F3N2

2-Isopropoxy-benzoyl chloride was condensed with 4-Amino-2-trifluromethyl benzonitrile in dichloromethane in presence of triethylamine as acid scavenger to yield N-4-Cyano-3-trifluoromethyl-phenyl)-2-Isopropoxy-benzamide. The reaction mixture was then concentrated in vacuo and the residue was extracted into ethyl acetate. The ethyl acetate layer was washed with water and with cold aqueous hydrochloric acid, then dried over sodium sulphate and finally concentrated in vacuo. The residue obtained was chromatographed over silica gel to afford the desired product. 1H-NMR:delta6.95-8.01 (7H,aromatic), delta4.04(1H,m,OCH), delta1.38(6H,d,Methyl)

According to the analysis of related databases, 654-70-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Kundu, Tapas Kumar; Balasubramanyam, Karanam; Swaminathan, Vankatesh; US2006/167107; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 654-70-6, The chemical industry reduces the impact on the environment during synthesis 654-70-6, name is 4-Cyano-3-trifluoromethylaniline, I believe this compound will play a more active role in future production and life.

General procedure: Thionyl chloride (4.3 g, 36 mmol) was added dropwise under argon to a solution of bromoacid 39 (5.5 g, 30 mmol) in 35 mL of DMA at -5 to -10 C. The resulting mixture was stirred for 2 h under the same conditions. A solution of the appropriate aniline (30 mmol) in 40 mL of DMA was added dropwise to the above solution, and the resulting mixture was stirred overnight at room temperature. The solvent was removed on rotavapor using high vacuum oil pump; the residue was diluted with saturated NaHCO3 solution, and extracted with ethyl ether (3 x 100 mL). Combined extracts were dried over anhydrous Na2SO4, filtered through celite, and purified by flash chromatography on silica gel, using DCM as eluent to afford the desired product. The data are in accordance with literature data [ref]. 1H-NMR (CDCl3): 9.09 (s,1H), 8.12 (d, J = 2.0 Hz, 1H), 7.98 (dd, J = 8.5 Hz, 2.0 Hz, 1H), 7.83 (d, J = 8.5 Hz,1H), 4.02 (d, J = 10.6 Hz, 1H), 3.62 (d, J = 10.6 Hz, 1H), 1.66 (s, 3H); 19F-NMR(CDCl3): -63.59 (s, 3F).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Cyano-3-trifluoromethylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Bassetto, Marcella; Ferla, Salvatore; Pertusati, Fabrizio; Kandil, Sahar; Westwell, Andrew D.; Brancale, Andrea; McGuigan, Christopher; European Journal of Medicinal Chemistry; vol. 118; (2016); p. 230 – 243;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts