Category: 6393-40-4

Related Products of 6393-40-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6393-40-4 as follows.

1g (6.1mmol) 4-Amino-3-nitrobenzonitrile was dissolved in 50ml ethanol and was subjected to hydrogenation using 35 psi of H2 and 10% Pd.C until the end of H2 uptake. The catalyst was filtered on a bed of Celite, washed with ethanol and concentrated in vacuo. Powder residue was used for the subsequent steps without crystallization. Yield: 88% (0.72g). Mp: 144-146C.14

According to the analysis of related databases, 6393-40-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Karaaslan, Cigdem; Kaiser, Marcel; Brun, Reto; Goeker, Hakan; Bioorganic and Medicinal Chemistry; vol. 24; 18; (2016); p. 4038 – 4044;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 6393-40-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 6393-40-4 name is 4-Amino-3-nitrobenzonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

4-amino-3-nitrobenzonitrile (1.0 eq) was reacted with 2,5-dimethoxy- tetrahydrofuran (1.0 eq) in acetic acid. The reaction was heated in a microwave oven at 160ºC for 10 min. The solvent was evaporated and the residue purified by flash chromatography on silica gel (hexanes/EtOAc gradient). 3-nitro-4-(1H-pyrrol-1-yl)benzonitrile was obtained as an orange-yellow solid (59% yield). LCMS (ES): >;95% pure, m/z 214 [M+l]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Amino-3-nitrobenzonitrile, and friends who are interested can also refer to it.

Reference:
Patent; CYLENE PHARMACEUTICALS, INC.; PIERRE, Fabrice; HADDACH, Mustapha; CHUA, Peter, C.; WO2010/135571; (2010); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 6393-40-4, name is 4-Amino-3-nitrobenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6393-40-4, Recommanded Product: 6393-40-4

General procedure: 4.2. General procedure for the indium-mediated reductivecyclization of 2-nitroanilines to prepare quinoxalines A mixture of the 2-nitroaniline derivative (1.0 mmol), dione (1.0or 2.0 mmol), indium (0.574 g, 5.0 mmol), and acetic acid (0.300 g,5 mmol or 0.600 g,10 mmol) or indium chloride (0.221 g,1 mmol or0.265 g,1.2 mmol) in methanol (5 mL) or toluene (5 mL) was stirredat 50 C, 80 C, or reux under a nitrogen atmosphere. After com-pletion of the reaction, the reaction mixture was diluted with ethylacetate (30 mL), ltered through Celite, and the ltrate was pouredinto 10% NaHCO3 (30 mL) and extracted with ethyl acetate(30 mL3). The combined organic extracts were dried over MgSO4,ltered, and concentrated. The residue was eluted with ethyl ace-tate/hexane (v/v10/90) through a silica gel column to give thecorresponding pure quinoxaline. Quinoxaline structures werecharacterized by 1H NMR, 13C NMR, FTIR, and GCeMS, and weremostly known compounds. For unknown compounds, elementalanalysis data were additionally obtained. 4.2.1. 2,3-Dimethylquinoxaline (5).19,31aef Yield 87%. Yellow solid,mp 109e110 C (lit.31f mp 105 C). TLC (10% ethyl acetate/hexane) Rf0.30; 1H NMR (400 MHz, CDCl3) d 7.91 (dd, 2H, J6.3, 3.5 Hz), 7.59(dd, 1H, J6.3, 3.5 Hz), 2.66 (s, 6H); 13C NMR (100 MHz, CDCl3)d 153.4, 141.0, 128.7, 128.2, 23.1; IR (KBr) 3109, 3078, 3030, 2995,2953, 2914, 1490, 1398, 1164 cm1;GCeMS m/z (rel intensity) 158(M, 99), 117 (100), 76 (28), 50 (12).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Go, Ahra; Lee, Geunsoo; Kim, Jaeho; Bae, Seolhee; Lee, Byung Min; Kim, Byeong Hyo; Tetrahedron; vol. 71; 8; (2015); p. 1215 – 1226;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Some common heterocyclic compound, 6393-40-4, name is 4-Amino-3-nitrobenzonitrile, molecular formula is C7H5N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 6393-40-4

3-Nitro-4-aminobenzonitrile (3.00 g) was dissolved in ethanol (300 ml) and added with stannous chloride dihydrate (20.7 g) and the whole was heated to 60C. Sodium borohydride (348 mg) was gradually added thereto and the whole was stirred overnight at 60C. After completion of the reaction, the resultant was added with water (300 ml) and neutralized with a 5 mol/l sodium hydroxide aqueous solution. After ethanol was distilled off under reduced pressure, the aqueous layer was added with ethyl acetate for extraction. The organic layer was washed with a saturated saline solution and then dried with anhydrous sodium sulfate. After filtration, the solvent was distilled off under reduced pressure. The residue was recrystallized, thereby obtaining the subject compound (1.11 g) as a brown crystal. MS(EI):m/z=133[M]+ 1H-NMR(500MHz,CDCl3):delta=6.68(1H,d,J=8,1Hz),6.95(1H,s),7.05(1H,d,J=8.1Hz).3-Nitro-4-amino-benzonitrile (4.38 g) was dissolved in ethanol (600 ml) and added with stannous chloride dihydrate (34.6 g) and the whole was heated to 60C. Sodium borohydride (366 mg) was gradually added thereto and the whole was stirred overnight at 60C. After completion of the reaction, the resultant was filtrated through Celite and the filtrate was subjected to distillation of the solvent under reduced pressure. The residue was dissolved in chloroform, washed with a saturated aqueous sodium hydrogen carbonate solution and a saturated saline solution, and then dried with anhydrous sodium sulfate. After filtration, the solvent was distilled off under reduced pressure. The residue was allowed to recrystallize (hexane/ethyl acetate), thereby obtaining the subject compound (2.56 g) as a brown crystal. MS (EI) :m/z=133[M]+ 1H-NMR(500MHz,CDCl3):delta=6.68(1H,d,J=8.1Hz),6.95(1H,s),7.05(1H, d,J=8.1Hz).An ethanol solution (300 ml) containing 4-amino-3-nitrobenzonitrile (3.00 g) was added with stannous chloride dihydrate (20.7 g) and then added with sodium borohydride (348 mg) . The whole was stirred overnight at 60C. After that, the resultant was subjected to distillation until the amount of the solution became about 100 ml. The resultant was added with water (100 ml) and a large amount of solid component was generated. The resultant was added with a 5 mol/l sodium hydroxide aqueous solution (42 ml) to adjust to pH 7. The solvent was distilled off. The solid component was filtrated out through Celite and washed with methanol and ethyl acetate in the stated order. The filtrate was again filtrated through Celite and only organic solvent was distilled off under reduced pressure. The remaining aqueous layer was subjected to extraction with ethyl acetate and dried with anhydrous magnesium sulfate , and the solvent was distilled off, thereby obtaining the subject compound (2.29 g) as a khaki crystal.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 6393-40-4, its application will become more common.

Reference:
Patent; Kureha Corporation; EP1724263; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

These common heterocyclic compound, 6393-40-4, name is 4-Amino-3-nitrobenzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 6393-40-4

General procedure: To a suspension of 2-Nitroanilines 2a-2g (10mmol) in water (5mL) and hydrochloric acid (37%, 2.5mL), a solution of sodium nitrite (0.74g, 10.75mmol) in water (4mL) at 0C was added dropwise. The mixture was stirred for 1h, diluted with water (30mL) and made acid with concentrated hydrochloric acid (2mL). In the case of 2b,f the reactions were carried out at room temperature. To this solution, freshly distilled 2,5-dimethyl-3-oxo-2,3-dihydrofuran [36] (1.24g, 11mmol) was added and the mixture was stirred for 1h at room temperature. The crude residue was collected by filtration. After drying, it was purified by column chromatography using a dichloromethane/ethyl acetate mixture in gradient as eluent and recrystallized from ethanol.

The synthetic route of 4-Amino-3-nitrobenzonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mingoia, Francesco; Di Sano, Caterina; Di Blasi, Francesco; Fazzari, Marco; Martorana, Annamaria; Almerico, Anna Maria; Lauria, Antonino; European Journal of Medicinal Chemistry; vol. 64; (2013); p. 345 – 356;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 6393-40-4, name is 4-Amino-3-nitrobenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 6393-40-4, category: nitriles-buliding-blocks

3-Nitro-4-aminobenzonitrile (3.00 g) was dissolved in ethanol (300 ml) and added with stannous chloride dihydrate (20.7 g) and the whole was heated to 60C. Sodium borohydride (348 mg) was gradually added thereto and the whole was stirred overnight at 60C. After completion of the reaction, the resultant was added with water (300 ml) and neutralized with a 5 mol/l sodium hydroxide aqueous solution. After ethanol was distilled off under reduced pressure, the aqueous layer was added with ethyl acetate for extraction. The organic layer was washed with a saturated saline solution and then dried with anhydrous sodium sulfate. After filtration, the solvent was distilled off under reduced pressure. The residue was recrystallized, thereby obtaining the subject compound (1.11 g) as a brown crystal. MS(EI):m/z=133[M]+ 1H-NMR(500MHz,CDCl3):delta=6.68(1H,d,J=8,1Hz),6.95(1H,s),7.05(1H,d,J=8.1Hz).3-Nitro-4-amino-benzonitrile (4.38 g) was dissolved in ethanol (600 ml) and added with stannous chloride dihydrate (34.6 g) and the whole was heated to 60C. Sodium borohydride (366 mg) was gradually added thereto and the whole was stirred overnight at 60C. After completion of the reaction, the resultant was filtrated through Celite and the filtrate was subjected to distillation of the solvent under reduced pressure. The residue was dissolved in chloroform, washed with a saturated aqueous sodium hydrogen carbonate solution and a saturated saline solution, and then dried with anhydrous sodium sulfate. After filtration, the solvent was distilled off under reduced pressure. The residue was allowed to recrystallize (hexane/ethyl acetate), thereby obtaining the subject compound (2.56 g) as a brown crystal. MS (EI) :m/z=133[M]+ 1H-NMR(500MHz,CDCl3):delta=6.68(1H,d,J=8.1Hz),6.95(1H,s),7.05(1H, d,J=8.1Hz).An ethanol solution (300 ml) containing 4-amino-3-nitrobenzonitrile (3.00 g) was added with stannous chloride dihydrate (20.7 g) and then added with sodium borohydride (348 mg) . The whole was stirred overnight at 60C. After that, the resultant was subjected to distillation until the amount of the solution became about 100 ml. The resultant was added with water (100 ml) and a large amount of solid component was generated. The resultant was added with a 5 mol/l sodium hydroxide aqueous solution (42 ml) to adjust to pH 7. The solvent was distilled off. The solid component was filtrated out through Celite and washed with methanol and ethyl acetate in the stated order. The filtrate was again filtrated through Celite and only organic solvent was distilled off under reduced pressure. The remaining aqueous layer was subjected to extraction with ethyl acetate and dried with anhydrous magnesium sulfate , and the solvent was distilled off, thereby obtaining the subject compound (2.29 g) as a khaki crystal.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Amino-3-nitrobenzonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Kureha Corporation; EP1724263; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 6393-40-4,Some common heterocyclic compound, 6393-40-4, name is 4-Amino-3-nitrobenzonitrile, molecular formula is C7H5N3O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(1) 4-Amino-3-nitrobenzonitrile (25 g) was dissolved in methanol (200 mL) and tetrahydrofuran (200 mL). The mixture was stirred in the presence of 10% palladium/carbon (3.0 g) under a hydrogen atomosphere (1 atm) for 20 hr. The reaction mixture was filtrated and the filtrate was concentrated under reduced pressure to give 3,4-diaminobenzonitrile (20 g) as a charcoal brown solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Amino-3-nitrobenzonitrile, its application will become more common.

Reference:
Patent; WELFIDE CORPORATION; EP1308439; (2003); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Electric Literature of 6393-40-4, A common heterocyclic compound, 6393-40-4, name is 4-Amino-3-nitrobenzonitrile, molecular formula is C7H5N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-amino-3-nitrobenzonitrile (2 g) in THF (30 ml) were added 4-pentenoyl chloride (2.90 g) and diisopropylethylamine (4.27 ml), followed by stirring at 80C for 12 hours. The reaction solution was poured into water, and extracted with EtOAc. The organic layer was dried over anhydrous MgSO4, and then filtered, and the filtrate was concentrated under reduced pressure. The residue was purified by silica gel column chromatography (chloroform:CH3OH) to obtain N-(4-cyano-2-nitrophenyl)pent-4-enamide (174 mg) as a colorless liquid.

The synthetic route of 6393-40-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Astellas Pharma Inc.; EP2003132; (2008); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 6393-40-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 6393-40-4 as follows.

1g (6.1mmol) 4-Amino-3-nitrobenzonitrile was dissolved in 50ml ethanol and was subjected to hydrogenation using 35 psi of H2 and 10% Pd.C until the end of H2 uptake. The catalyst was filtered on a bed of Celite, washed with ethanol and concentrated in vacuo. Powder residue was used for the subsequent steps without crystallization. Yield: 88% (0.72g). Mp: 144-146C.14

According to the analysis of related databases, 6393-40-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Karaaslan, Cigdem; Kaiser, Marcel; Brun, Reto; Goeker, Hakan; Bioorganic and Medicinal Chemistry; vol. 24; 18; (2016); p. 4038 – 4044;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 6393-40-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 6393-40-4 name is 4-Amino-3-nitrobenzonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

4-amino-3-nitrobenzonitrile (1.0 eq) was reacted with 2,5-dimethoxy- tetrahydrofuran (1.0 eq) in acetic acid. The reaction was heated in a microwave oven at 160ºC for 10 min. The solvent was evaporated and the residue purified by flash chromatography on silica gel (hexanes/EtOAc gradient). 3-nitro-4-(1H-pyrrol-1-yl)benzonitrile was obtained as an orange-yellow solid (59% yield). LCMS (ES): >;95% pure, m/z 214 [M+l]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Amino-3-nitrobenzonitrile, and friends who are interested can also refer to it.

Reference:
Patent; CYLENE PHARMACEUTICALS, INC.; PIERRE, Fabrice; HADDACH, Mustapha; CHUA, Peter, C.; WO2010/135571; (2010); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts