9/24/2021 News Discovery of 4640-66-8

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

Electric Literature of 4640-66-8,Some common heterocyclic compound, 4640-66-8, name is 4-Chlorophenacylcyanide, molecular formula is C9H6ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Benzoyl acetonitrile (1, 0.5 mmol), cyclic 2-diazo-1,3-dicarbonyl compound (2, 1.25 mmol), [RhCp*Cl2]2 (0.025 mmol), CsOAc (0.25 mmol), Cu(OAc)2*H2O (1.0 mmol) and DCE (2 mL) were sequentially charged into a reaction tube. The tube was then sealed and the mixture was stirred at 80 C. Upon completion, it was cooled to room temperature, quenched with saturated brine (10 mL), and extracted with EtOAc (10 mL * 3). The combined organic phase was dried over anhydrous Na2SO4, and concentrated under reduced pressure. The residue was purified by silica gel chromatography using petroleum ether/ethyl acetate (5:1) as eluent to afford 3.

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Beibei; Li, Bin; Guo, Chenhao; Zhang, Xinying; Fan, Xuesen; Tetrahedron Letters; vol. 59; 32; (2018); p. 3094 – 3099;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

16-Sep-2021 News Share a compound : 4640-66-8

The synthetic route of 4-Chlorophenacylcyanide has been constantly updated, and we look forward to future research findings.

Electric Literature of 4640-66-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4640-66-8, name is 4-Chlorophenacylcyanide belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a 0.5-2.0ml vial with 1 mmol ketone (1 eq) issolved in 2-pentanol (1.66 M) was added 1.1 eq of aromatic aldehyde and catalytic piperidine (0.08 eq), stirring vigorously. After heating under muWave for 15min at 120 C, the reaction was cooled to r.t. and precipitate was vacuum filtered and washed with minimal, cold hexanes. After drying under vacuum, solid was analyzed via NMR, IR, and mp.

The synthetic route of 4-Chlorophenacylcyanide has been constantly updated, and we look forward to future research findings.

Reference:
Article; Deshpande, Shyam J.; Leger, Paul R.; Sieck, Stephen R.; Tetrahedron Letters; vol. 53; 14; (2012); p. 1772 – 1775;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

9/10/2021 News Extended knowledge of 4640-66-8

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 4640-66-8, name is 4-Chlorophenacylcyanide, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4640-66-8, name: 4-Chlorophenacylcyanide

Add Na2CO3 (0.25 mmol) to a 25 mL reaction flask,a compound (0.5 mmol) represented by the formula m1,a compound of formula m2 (0.5 mmol) and acetonitrile (3 mL),The reaction was carried out at 90 C for 24 h, and the reaction was followed by thin layer chromatography.After the reaction was completed, the solvent was evaporated under reduced pressure and ethyl acetate was dissolved.Separation on a silica gel column (developing solvent petroleum ether / ethyl acetate volume ratio = 6:1) afforded white solid compound A13.(The structural formula of the compound A13 is as shown by m3,The nuclear magnetic resonance spectrum is shown in Figure 11.The nuclear magnetic carbon spectrum is shown in Figure 12.The synthesis reaction formula is shown in Fig. 25, and the yield is 55%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Anhui Normal University; Li Qianqian; He Xinwei; Tao Jiajia; Shang Yongjia; (26 pag.)CN108440467; (2018); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Continuously updated synthesis method about C9H6ClNO

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4640-66-8, name is 4-Chlorophenacylcyanide, A new synthetic method of this compound is introduced below., HPLC of Formula: C9H6ClNO

with morpholine This substance has been prepared using morpholine as the activating partner (eg. WO 2015/156601, WO 2015/131113, Angewandte Chemie, International Edition (2013), 52, 14060-14064, Journal of Biological Chemistry (2012), 287, 28840-28851, WO2011/143660, Nature (2010), 468, 1067-1073 & US 6323214) or with diethylamine (WO 2009/063301). In all reports, the product was purified by chromatography followed by recrystallization and no mention of the ethyl-isomer as side product has been recorded ever anywhere.Purification via oxalate saltCrude aminothiophene (5.0 g, 19 mmol) and oxalic acid (1.7 g, 1 eq.) were taken up in methanol (50 ml). The light orange suspension was heated to reflux creating a dark red solution which then was cooled to ambient temperature. The brown suspension that formed was evaporated on a rotovap at 45 C/250-25 mb and the crude oxalate salt dried for 4 h at 45 C/25 mbar providing a yellow-orange crystalline solid (6.2 g, GC: 87% product, 13% ethyl isomer). a) The oxalate salt (3.0 g) was taken up in acetonitrile (30 ml, lOx v/w) and the brown suspension was heated to reflux. The red solution produced was cooled and stirred at 25 C/1 h. A brown suspension arose which was filtered and the purified product was washed with dichloromethane (4 ml). The salt recovered was dried at 45 C/25 mb for 3 h and the filtrate evaporated.Yield: 1.4 g yellow solid GC (area): 99% product, 1% ethyl isomer

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BLISS, Fritz; DU, Xiaohua; HE, Dawei; HILDBRAND, Stefan; SPURR, Paul; YE, Wenfa; ZHENG, Jianbing; (38 pag.)WO2018/109053; (2018); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Discovery of 4-Chlorophenacylcyanide

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chlorophenacylcyanide, its application will become more common.

Related Products of 4640-66-8,Some common heterocyclic compound, 4640-66-8, name is 4-Chlorophenacylcyanide, molecular formula is C9H6ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: General procedure: The substrate 1 (1.0 mmol) and thiourea 2(2.0 mmol) were added to solvent (5 mL methanol) at room tem-perature. To the reaction mixture, TBHP (3.0 mmol) and AIBN(0.2 mmol) were added respectively. The reaction mixture wasstirred at room temperature (for substrates 1a-f) or reux tem-perature (for substrates 1g-r) until TLC indicated the total consumption of 1 (for substrates 1p-q, the reaction time is 24 h).The residue was treated with saturated aqueous NaHCO3 (50 mL)and then extracted with EA (30 mL 3). The organic phase waswashed with brine (50 mL 1), dried over anhydrous Na2SO4. Thesolvent was removed and the residue was puried by ash columnchromatography on silica gel (EA/PE) to afford the desired compound 3.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Chlorophenacylcyanide, its application will become more common.

Reference:
Article; Sun, Jiyun; Ge, Huaibin; Zhen, Xiaohua; An, Xuechan; Zhang, Guangtao; Zhang-Negrerie, Daisy; Du, Yunfei; Zhao, Kang; Tetrahedron; vol. 74; 17; (2018); p. 2107 – 2114;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Discovery of C9H6ClNO

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4640-66-8, name is 4-Chlorophenacylcyanide belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C9H6ClNO

General procedure: To a 0.5-2.0ml vial with 1 mmol ketone (1 eq) issolved in 2-pentanol (1.66 M) was added 1.1 eq of aromatic aldehyde and catalytic piperidine (0.08 eq), stirring vigorously. After heating under muWave for 15min at 120 C, the reaction was cooled to r.t. and precipitate was vacuum filtered and washed with minimal, cold hexanes. After drying under vacuum, solid was analyzed via NMR, IR, and mp.

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Deshpande, Shyam J.; Leger, Paul R.; Sieck, Stephen R.; Tetrahedron Letters; vol. 53; 14; (2012); p. 1772 – 1775;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Continuously updated synthesis method about 4640-66-8

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4640-66-8, name is 4-Chlorophenacylcyanide belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 4-Chlorophenacylcyanide

General procedure: To a solution of 2 (0.49 g, 1.7 mmol) in ethanol (20 ml) and piperidine (0.5 ml) as a catalyst was added substituted beta-ketonitriles 3a-d (1.7 mmol). The reaction mixture was heated under reflux for (8-10) h and the progress of the reaction was monitored by TLC using benzene/acetone (2:1) as eluent. The solvent was evaporated under reduced pressure; the oil residue was treated with petroleum ether 40-60C (3 x 10 ml) and recrystallized from ethanol to give (4a-d).

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; El-Borai, Mohamed A.; Rizk, Hala F.; Beltagy, Doha M.; El-Deeb, Ibrahim Y.; European Journal of Medicinal Chemistry; vol. 66; (2013); p. 415 – 422;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of C9H6ClNO

According to the analysis of related databases, 4640-66-8, the application of this compound in the production field has become more and more popular.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 4640-66-8 as follows. name: 4-Chlorophenacylcyanide

General procedure: To a 25 mL flask was added catalysts 5g (0.04 mmol, 23.7 mg), K2CO3 (0.24 mmol, 33.2 mg), 3 or 6 or 8 (0.24 mmol) and toluene (1.5 mL). After the mixture was stirred at 0 C for 5 min, a solution of 2 (0.20 mmol) in toluene (1.5 mL) was slowly added. The reaction was stirred at 0 C for 48 h. After that, the solvent was removed and the residue was directly subjected to silica gel column chromatography (petroleum ether/ethyl acetate as eluent) to give (3+3) annulation product.

According to the analysis of related databases, 4640-66-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Ni, Chunjie; Zhou, Weiping; Tong, Xiaofeng; Tetrahedron; vol. 73; 24; (2017); p. 3347 – 3354;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Discovery of C9H6ClNO

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

Reference of 4640-66-8,Some common heterocyclic compound, 4640-66-8, name is 4-Chlorophenacylcyanide, molecular formula is C9H6ClNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Benzoyl acetonitrile (1, 0.5 mmol), cyclic 2-diazo-1,3-dicarbonyl compound (2, 1.25 mmol), [RhCp*Cl2]2 (0.025 mmol), CsOAc (0.25 mmol), Cu(OAc)2*H2O (1.0 mmol) and DCE (2 mL) were sequentially charged into a reaction tube. The tube was then sealed and the mixture was stirred at 80 C. Upon completion, it was cooled to room temperature, quenched with saturated brine (10 mL), and extracted with EtOAc (10 mL * 3). The combined organic phase was dried over anhydrous Na2SO4, and concentrated under reduced pressure. The residue was purified by silica gel chromatography using petroleum ether/ethyl acetate (5:1) as eluent to afford 3.

The synthetic route of 4640-66-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zhang, Beibei; Li, Bin; Guo, Chenhao; Zhang, Xinying; Fan, Xuesen; Tetrahedron Letters; vol. 59; 32; (2018); p. 3094 – 3099;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Extended knowledge of C9H6ClNO

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: 4640-66-8, name is 4-Chlorophenacylcyanide, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4640-66-8, Recommanded Product: 4-Chlorophenacylcyanide

Add Na2CO3 (0.25 mmol) to a 25 mL reaction flask,a compound (0.5 mmol) represented by the formula m1,a compound of formula m2 (0.5 mmol) and acetonitrile (3 mL),The reaction was carried out at 90 C for 24 h, and the reaction was followed by thin layer chromatography.After the reaction was completed, the solvent was evaporated under reduced pressure and ethyl acetate was dissolved.Separation on a silica gel column (developing solvent petroleum ether / ethyl acetate volume ratio = 6:1) afforded white solid compound A13.(The structural formula of the compound A13 is as shown by m3,The nuclear magnetic resonance spectrum is shown in Figure 11.The nuclear magnetic carbon spectrum is shown in Figure 12.The synthesis reaction formula is shown in Fig. 25, and the yield is 55%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Anhui Normal University; Li Qianqian; He Xinwei; Tao Jiajia; Shang Yongjia; (26 pag.)CN108440467; (2018); A;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts