Category: 243128-37-2

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 243128-37-2, name is 4-Fluoro-3-methoxybenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Product Details of 243128-37-2

To a stirred solution of trans-4-aminocyclohexanol (115 mg, [1] mmol) in DMF (5 mL) at 0 [C] was added 60% NaH in mineral oil (120 mg, 3 [MMOL).] The reaction mixture was stirred at 0 [C] for 1/2 hour and then 4-fluoro-3-methoxy-benzonitrile (182 mg, 1.2 mmol) was added. It was heated to 60 [C] for 2 hours and stirred for 12 hours at room temperature. The reaction mixture was diluted with ethyl acetate and washed with water (3 times) and brine. The organic layer was dried (sodium sulfate), filtered, and concentrated under reduced pressure to provide the titled compound. MS (DCI) [M/Z] 247 (M+H) [+.]

The synthetic route of 243128-37-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ABBOTT LABORATORIES; WO2004/26822; (2004); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 243128-37-2, A common heterocyclic compound, 243128-37-2, name is 4-Fluoro-3-methoxybenzonitrile, molecular formula is C8H6FNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step A. Under an argon atmosphere a mixture of commercially available 4-fluoro- 3-methoxybenzonitrile (5.O g), AlCl3 (8.8 g) and NaCl (1.94 g) was heated (melted) to 190C for 45 min, cooled, poured on ice (200 mL) and extracted with CHCI3 (3 x). The combined organic phases were washed with H2O, dried (MgSO4), filtered, concentrated and purified by chromatography (silica, cyclohexane/EtOAc 9:1 to 8:1) to afford the title compound as colorless needles (3.45 g, 76%). [MH]+ = 138.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ALANTOS PHARMACEUTICALS HOLDING, INC.; WO2008/63671; (2008); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 243128-37-2, name is 4-Fluoro-3-methoxybenzonitrile, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 243128-37-2

A mixture of 57 (1.0 g, 5.8 mmol), 5-iodophenol (1.27 g, 5.8 mmol) in DMSO (10.0 mL) and anhydrous K2CO3 (1.2 g, 8.7 mmol) was heated at 110 C for 1 h. The mixture was poured into ice water and extracted with EtOAc (3 x 50 mL). The organic layer was sequentially washed with brine (2 x 75 mL), dried over anhydrous Na2SC>4, and concentrated in vacuo to give 3-(3-iodophenoxy)-4- methoxybenzonitrile (66 f) (1.76 g, 81 %) which was used without further purification. HR-MS (ES) calcd for C14H10INO2 [M+l]+ 351.9803, found 351.9800.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 243128-37-2.

Reference:
Patent; YALE UNIVERSITY; WO2013/56003; (2013); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 243128-37-2, name is 4-Fluoro-3-methoxybenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 243128-37-2, Quality Control of 4-Fluoro-3-methoxybenzonitrile

Example Al a) Preparation of intermediate 1. K2CO3 (112 g, 0.81 mol) was added to a stirred sol. of 4-methylimidazole (66.0 g, 0.804 mol) in DMSO (600 ml). The r.m. was heated at 120 0C. Subsequently 4-fluoro- 3-methoxybenzonitrile (60.0 g, 0.397 mol) was added portionwise (internal reaction temperature increased to 140 0C). The r.m. was maintained at 120 0C for 1 h, was cooled, and was then poured onto ice-water (3 1). This mixture was stirred for 30 min. The precipitated solid was collected by filtration and washed with H2O. The off-white solid was recrystallised from MeCN to yield 30.0 g of intermediate 1. A second crop of product was obtained from the mother liquor. Yield: 12.3 g of intermediate 1(combined yield; 49.9 %).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; WU, Tongfei; GIJSEN, Henricus, Jacobus, Maria; ROMBOUTS, Frederik, Jan, Rita; BISCHOFF, Francois, Paul; BERTHELOT, Didier, Jean-Claude; OEHLRICH, Daniel; DE CLEYN, Michel, Anna, Jozef; PIETERS, Serge, Maria, Aloysius; MINNE, Garrett, Berlond; VELTER, Adriana, Ingrid; VAN BRANDT, Sven, Franciscus, Anna; SURKYN, Michel; WO2011/6903; (2011); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 243128-37-2, name is 4-Fluoro-3-methoxybenzonitrile, A new synthetic method of this compound is introduced below., SDS of cas: 243128-37-2

Example 59A 4-(4-trans-amino-cyclohexyloxy)-3-methoxy-benzonitrile To a stirred solution of trans-4-aminocyclohexanol (115 mg, 1 mmol) in DMF (5 mL) at 0 C. was added 60% NaH in mineral oil (120 mg, 3 mmol). The reaction mixture was stirred at 0 C. for 1/2 hour and then 4-fluoro-3-methoxy-benzonitrile (182 mg, 1.2 mmol) was added. It was heated to 60 C. for 2 hours and stirred for 12 hours at room temperature. The reaction mixture was diluted with ethyl acetate and washed with water (3 times) and brine. The organic layer was dried (sodium sulfate), filtered, and concentrated under reduced pressure to provide the titled compound. MS (DCI) m/z 247 (M+H)+.

The synthetic route of 243128-37-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Madar, David J.; Djuric, Stevan W.; Michmerhuizen, Melissa J.; Kopecka, Hana A.; Li, Xiaofeng; Longenecker, Kenton L.; Pei, Zhonghua; Pireh, Daisy; Sham, Hing L.; Stewart, Kent D.; Szczepankiewicz, Bruce G.; Wiedeman, Paul E.; Yong, Hong; US2004/259843; (2004); A1;; ; Patent; Madar, David J.; Djuric, Stevan W.; Michmerhuizen, Melissa J.; Kopecka, Hana A.; Li, Xiaofeng; Longenecker, Kenton L.; Pei, Zhonghua; Pireh, Daisy; Sham, Hing L.; Stewart, Kent D.; Szczepankiewicz, Bruce G.; Wiedeman, Paul E.; Yong, Hong; US2005/215784; (2005); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Reference of 243128-37-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 243128-37-2, name is 4-Fluoro-3-methoxybenzonitrile, This compound has unique chemical properties. The synthetic route is as follows.

Preparation 98; 4-Fluoro-3-methoxy-benz lamine; Add 4-fluoro-3-methoxy-benzonitrile (2 g, 0. 01 mol), 10% palladium on carbon (0.400 g) and glacial acetic acid (120 ml) to a pressure vessel. Purge the reaction vessel with nitrogen, purge the reaction vessel with hydrogen, pressurize the reaction mixture with hydrogen (415 Kpa), seal the vessel, and agitate the reaction. After 8 hours stop the agitation, vent the excess hydrogen from the vessel and purge the vessel with nitrogen. Filter the reaction mixture to remove the 5% palladium on carbon and return the filtrate for product isolation. Concentrate the crude solution, re-dissolve in CH2C12 (80mL) and washe with 5N NaOH (35mL). Separate the organic and aqueous phases and extract the aqueous with additional CHUCK (20mL). Combine the organic solutions, dry, filter and concentrate to give the crude material 2. 08g (100%). The title compound as the major product (Rf = 0.12, 10% MeOH/CH2C12) is used without further purification. MS (ES+) 156.1 (M+1) +. lH NMR (400MHz, CDC13) : 8 7. 01 (dd, 1H, J= 8.2, 11.4), 6.95 (dd, 1H, J = 2. 1,8. 4), 6.80 (m, 1H), 3.89 (s, 3H), 3.82 (s, 2H), 1.54 (br s, 2H).

The chemical industry reduces the impact on the environment during synthesis 4-Fluoro-3-methoxybenzonitrile. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/66126; (2005); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts