Category: 144649-99-0

Adding a certain compound to certain chemical reactions, such as: 144649-99-0, name is 5-Bromo-2-methoxybenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 144649-99-0, name: 5-Bromo-2-methoxybenzonitrile

Preparation of Intermediate 1-2; 5-(2-Chloropyrimidin-4-yl)-2-methoxybenzonitrileReagents: (a) Pd(dppf)Cl2, KOAc, /?-dioxane: (b) 2,4-dichloropyrimidine, K2C03,Pd(PPh3)4, CH3CN, H20, reflux, 5 h;[0209] Step 1. 2-Methoxy-5-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yl)benzonitrile: To a solution of 2-methoxy-5-bromobenzonitrile (5.0 g, 23.6 mmol) in /?-dioxane (125 mL), bis(pinacolato)diborane (9.0 g, 35.4 mmol), KOAc (7.0 g, 71.3 mmol), and Pd(dppf)Cl2 (0.863 g, 1.17 mmol) were added. The resulting mixture was stirred for 18 h at 80 C. The cooled reaction crude was diluted with 120 mL EtOAc, washed with H20 and brine, dried (Na2S04), filtered, and concentrated in vacuo. The residue was purified by column chromatography on Si02 (Hexanes/EtOAc) to afford the title compound (5.6 g, 92%). GC/MS (EI, M+) 245

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromo-2-methoxybenzonitrile, and friends who are interested can also refer to it.

Reference:
Patent; MYREXIS, INC.; HOLCOMB, Ryan C.; SEBAHAR, Paul R.; SUZUKI, Kazuyuki; McLEOD, Donald A.; DASTRUP, David M.; HOARAU, Christophe; HALTER, Robert J.; BURSAVICH, Matthew Gregory; SHENDEROVICH, Mark D.; RICHARDS, Burt; BARTEL, Paul L.; WO2012/142329; (2012); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 144649-99-0, name is 5-Bromo-2-methoxybenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 144649-99-0

Compound 64 (E)-Methyl 3-(3-(N-((3′-cyano-4′-methoxy-[l,l’-biphenyl]-4- yl)methyl)cyclohexanecarboxamido)phenyl)acrylate [00430] A mixture of Intermediate 16 (500 mg, 0.99 mmol), 5-bromo-2-methoxy-benzonitrile (316 mg, 1.49 mmol), Cs2C03 (647 mg, 1.99 mmol), Pd(PPh3)4 (230 mg, 199 mmol) in DMF (6 mL) was degassed with vacuum/nitrogen cycles (3 chi), stirred at 90 C for 12 h, and then filtered. Saturated EDTA-2Na (20 mL) was added, and the reaction mixture was stirred for 1 h and then extracted with ethyl acetate (3 x20 mL). The combined organic layers were washed with water (3 x 15 mL) and brine (2×20 mL), dried over anhydrous Na2S04, filtered and concentrated. The residue was purified by reverse-phase HPLC to give (E)-m ethyl 3-(3-(N-((3′-cyano-4′-methoxy- [l, l’-biphenyl]-4-yl)methyl)cyclohexanecarboxamido)phenyl)acrylate (110 mg, 22%) as a white solid. 1H MR (DMSO-i): delta 8.01 (d, IH), 7.96 (dd, IH), 7.58-7.70 (m, 5H), 7.42 (t, IH), 7.31 (d, IH), 7.24 (d, 2H), 7.17 (d, IH), 6.64 (d, IH), 4.89 (s., 2H), 3.95 (s, 3H), 3.71 (s, 3H), 2.19 (m, IH), 1.58-1.72 (m, 4H), 1.36-1.54 (m, 3H), 1.05-1.18 (m, IH), 0.89 (d, 2H); MS: 509.3 [M+H]+.

The synthetic route of 144649-99-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; METACRINE, INC.; SMITH, Nicholas D.; GOVEK, Steven P.; NAGASAWA, Johnny Y.; (228 pag.)WO2017/49172; (2017); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 144649-99-0, name is 5-Bromo-2-methoxybenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Safety of 5-Bromo-2-methoxybenzonitrile

Example 35 1,1-Dimethylethyl{[5-bromo-2-(methyloxy)phenyl]methyl}carbamate NaBH4 (2.9 g, 75.5 mmol) was cautiously added in several portions to a solution of NiCl2 (2.6 g, 19.8 mmol), Boc2O (8.2 g, 37.7 mmol) and 5-bromo-2-(methyloxy)benzonitrile (4.0 g, 18.9 mmol) in dry EtOH (70 mL) at 0 C. Once the reaction had subsided, the mixture was left to stir at room temperature for 3 h. Ethanol was removed under reduced pressure and the residue was dissolved in EtOAc and saturated solution of NaHCO3, then filtered and the aqueous layer was repeatedly washed with EtOAc. The combined organic phases were dried Na2SO4. The crude product was purified by flash column chromatography to give the captioned the product (1.5 g yield: 25%). 1H NMR (400 MHz, CDCl3) delta 7.36-7.33 (m, 2H), 6.74 (d, J=8.8 Hz, 1H), 4.97 (br, 1H), 4.27 (d, J=4.8 Hz, 1H), 3.82 (s, 3H), 1.45 (s, 9H); 13C NMR (400 MHz, CDCl3) delta 156.5, 155.8, 131.7, 131.1, 129.3, 111.8, 79.5, 55.5, 39.9, 26.4. HPLC: retention time.

The synthetic route of 144649-99-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Glaxo Group Limited; US2009/203677; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

144649-99-0, name is 5-Bromo-2-methoxybenzonitrile, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 144649-99-0

Example 35 1,1-Dimethylethyl {[5-bromo-2-(methyloxy)phenyl]methyl}carbamate NaBH4 (2.9 g, 75.5 mmol) was cautiously added in several portions to a solution of NiCl2 (2.6 g, 19.8 mmol), Boc2O (8.2 g, 37.7 mmol) and 5-bromo-2-(methyloxy)benzonitrile (4.0 g, 18.9 mmol) in dry EtOH (70 mL) at 0 C. Once the reaction had subsided, the mixture was left to stir at room temperature for 3 h. Ethanol was removed under reduced pressure and the residue was dissolved in EtOAc and saturated solution of NaHCO3, then filtered and the aqueous layer was repeatedly washed with EtOAc. The combined organic phases were dried Na2SO4. The crude product was purified by flash column chromatography to give the captioned the product (1.5 g yield: 25%). 1H NMR (400 MHz, CDCl3) delta 7.36-7.33 (m, 2H), 6.74 (d, J=8.8 Hz, 1H), 4.97 (br, 1H), 4.27 (d, J=4.8 Hz, 1H), 3.82 (s, 3H), 1.45 (s, 9H); 13C NMR (400 MHz, CDCl3) delta 156.5, 155.8, 131.7, 131.1, 129.3, 111.8, 79.5, 55.5, 39.9, 26.4. HPLC: retention time.

The synthetic route of 144649-99-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Glaxo Group Limited; US2009/203657; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 144649-99-0, name is 5-Bromo-2-methoxybenzonitrile belongs to nitriles-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. name: 5-Bromo-2-methoxybenzonitrile

Compound 64 (E)-Methyl 3-(3-(N-((3′-cyano-4′-methoxy-[l,l’-biphenyl]-4- yl)methyl)cyclohexanecarboxamido)phenyl)acrylate [00430] A mixture of Intermediate 16 (500 mg, 0.99 mmol), 5-bromo-2-methoxy-benzonitrile (316 mg, 1.49 mmol), Cs2C03 (647 mg, 1.99 mmol), Pd(PPh3)4 (230 mg, 199 mmol) in DMF (6 mL) was degassed with vacuum/nitrogen cycles (3 chi), stirred at 90 C for 12 h, and then filtered. Saturated EDTA-2Na (20 mL) was added, and the reaction mixture was stirred for 1 h and then extracted with ethyl acetate (3 x20 mL). The combined organic layers were washed with water (3 x 15 mL) and brine (2×20 mL), dried over anhydrous Na2S04, filtered and concentrated. The residue was purified by reverse-phase HPLC to give (E)-m ethyl 3-(3-(N-((3′-cyano-4′-methoxy- [l, l’-biphenyl]-4-yl)methyl)cyclohexanecarboxamido)phenyl)acrylate (110 mg, 22%) as a white solid. 1H MR (DMSO-i): delta 8.01 (d, IH), 7.96 (dd, IH), 7.58-7.70 (m, 5H), 7.42 (t, IH), 7.31 (d, IH), 7.24 (d, 2H), 7.17 (d, IH), 6.64 (d, IH), 4.89 (s., 2H), 3.95 (s, 3H), 3.71 (s, 3H), 2.19 (m, IH), 1.58-1.72 (m, 4H), 1.36-1.54 (m, 3H), 1.05-1.18 (m, IH), 0.89 (d, 2H); MS: 509.3 [M+H]+.

The synthetic route of 144649-99-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; METACRINE, INC.; SMITH, Nicholas D.; GOVEK, Steven P.; NAGASAWA, Johnny Y.; (228 pag.)WO2017/49172; (2017); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 144649-99-0, name is 5-Bromo-2-methoxybenzonitrile, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C8H6BrNO

16.23 ml of n-butyllithium solution (1.6M in hexane) are added dropwise to a solution of 5.00 g of 5-bromo-2-methoxybenzonitrile in 90 ml of dry tetrahydrofuran at -78C. After stirring at this temperature for 45 minutes, 6.71 ml of triisopropylborate are added, and the mixture is then slowly warmed to -20C. 50 ml of 1 N HCl are added to the reaction mixture. The phase is separated and the aqueous phase is extracted three more times with 100 ml of diethyl ether each time. The combined organic phases are dried with sodium sulphate, filtered and evaporated. The remaining oil is mixed with pentane, and the precipitate which separates out is filtered off with suction and washed once with a little dichloromethane. Drying under high vacuum affords the title compound as a white solid. Rt = 2.74.

According to the analysis of related databases, 144649-99-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Speedel Experimenta AG; EP1987834; (2008); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 144649-99-0, name is 5-Bromo-2-methoxybenzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 144649-99-0, category: nitriles-buliding-blocks

Preparation of Intermediate 1-2; 5-(2-Chloropyrimidin-4-yl)-2-methoxybenzonitrileReagents: (a) Pd(dppf)Cl2, KOAc, /?-dioxane: (b) 2,4-dichloropyrimidine, K2C03,Pd(PPh3)4, CH3CN, H20, reflux, 5 h;[0209] Step 1. 2-Methoxy-5-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yl)benzonitrile: To a solution of 2-methoxy-5-bromobenzonitrile (5.0 g, 23.6 mmol) in /?-dioxane (125 mL), bis(pinacolato)diborane (9.0 g, 35.4 mmol), KOAc (7.0 g, 71.3 mmol), and Pd(dppf)Cl2 (0.863 g, 1.17 mmol) were added. The resulting mixture was stirred for 18 h at 80 C. The cooled reaction crude was diluted with 120 mL EtOAc, washed with H20 and brine, dried (Na2S04), filtered, and concentrated in vacuo. The residue was purified by column chromatography on Si02 (Hexanes/EtOAc) to afford the title compound (5.6 g, 92%). GC/MS (EI, M+) 245

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromo-2-methoxybenzonitrile, and friends who are interested can also refer to it.

Reference:
Patent; MYREXIS, INC.; HOLCOMB, Ryan C.; SEBAHAR, Paul R.; SUZUKI, Kazuyuki; McLEOD, Donald A.; DASTRUP, David M.; HOARAU, Christophe; HALTER, Robert J.; BURSAVICH, Matthew Gregory; SHENDEROVICH, Mark D.; RICHARDS, Burt; BARTEL, Paul L.; WO2012/142329; (2012); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts