Category: 103146-25-4

Synthetic Route of 103146-25-4,Some common heterocyclic compound, 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, molecular formula is C20H23FN2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A test tube equipped with a stopper was charged with 10 mg (0.029 m mol) of [(=T :)-4-] [4-dimethylamino-1- (4′-fluorophenyl)-1-hydroxybutyl]-3-hydroxymethylbenzonitrile, 10 mg of Novozym 435 (product of NOvozymes), 33 mg (0.29 [M MOL)] of vinyl butyrate and 1 ml of various kinds of solvents, and stirred at [30C] for 16 hours. After the reaction, converted ratios and optical purities were analyzed and E-values were calculated. The results are shown in Table 9.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, its application will become more common.

Reference:
Patent; H. LUNDBECK A/S; WO2004/14821; (2004); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Application of 103146-25-4,Some common heterocyclic compound, 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, molecular formula is C20H23FN2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Experiment 38; A range of experiments were conducted examining the resolution of diol with (+)-(S,S)-DTT. The general procedure is described below, and the details and results for each reaction are in table 1.Racemic diol (20 g, 58.4 mmol) was dissolved in approximately half of the solvent used for the experiment at 40 C. (+)-(S,S)-DTT.H2O (quantity specified in the table) was added as a solution in the other half of the solvent. The solution was held at 40 C. and was seeded within two minutes with crystals of (S)-diol.?(+)-(S,S)-DTT (approximately 5 mg). Crystallization typically began within 5-10 minutes after seeding. After 2 h at 40 C., the temperature of the solution was lowered to 20 C. over 2 h, and the solution was held at this temperature for a further 1 h. The product was then separated by filtration, washed with the appropriate solvent (2¡Á20 mL) and dried overnight at 60 C. under reduced pressure.

The synthetic route of 103146-25-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; H. Lundbeck A/S; US2009/69582; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Related Products of 103146-25-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, This compound has unique chemical properties. The synthetic route is as follows.

Oxalate [(+-)-Diol Oxalate Salt] (+-)-Diol compound (VI) (12 g, 0.035 mol) and oxalic acid dihydrate (4.64 g, 0.0368, 1.05 mol) were added to methanol (36 ml) and heated the contents to 55-60 C. to obtain a clear solution. The obtained solution was cooled to 25-30 C. and stirred for 3 h to complete the crystallization. Product was filtered and thereafter, dried at 50-60 C. under reduced pressure to yield 11 g of diol oxalate salt (VIa) with HPLC purity 99.93%.

The chemical industry reduces the impact on the environment during synthesis 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Kaushik, Vipin Kumar; Mohammed, Umar Khan; Meenakshisunderam, Sivakumaran; US2009/99375; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 103146-25-4, category: nitriles-buliding-blocks

Example 3 Preparation of citalopram To 20g citalopram diol intermediate alkali crystal obtained in Example1, 200ml toluene and 80g phosphoric acid were added, the solution was stirred at 80C for 2.5 hours and then cooled down to 50C with ice bath, its PH was adjusted to 10 with 20% NaOH solution. Then toluene solution was separated, washed with water and dried, disposed with silica gel and filtrated, evaporated to eliminate toluene to give 17.5g citalopram oil substance. The purity of the product was 99.65% (HPLC, area normalization method), and the yield was over 86%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Hangzhou Minsheng Pharm. Co., Ltd.; EP1700851; (2006); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

103146-25-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, This compound has unique chemical properties. The synthetic route is as follows.

Experiment 37: Experiment 11 was repeated except that a mixture of 1-propanol and ethanol (50:50) was used as the solvent in stead of 1-propanol in a total volume of 4.4 V, 0.5 eq of (+)-O,O’-di-/?-toluoyl-(S,S)-tartaric acid was used, and the holding time before filtration was 0.5 h. Molar yield: 27.4%, enantiomeric purity: 99.4% S.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; H. LUNDBECK A/S; WO2009/33488; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

103146-25-4, These common heterocyclic compound, 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Experiment 38; A range of experiments were conducted examining the resolution of diol with (+)-(S,S)-DTT. The general procedure is described below, and the details and results for each reaction are in table 1.Racemic diol (20 g, 58.4 mmol) was dissolved in approximately half of the solvent used for the experiment at 40 C. (+)-(S,S)-DTT.H2O (quantity specified in the table) was added as a solution in the other half of the solvent. The solution was held at 40 C. and was seeded within two minutes with crystals of (S)-diol.?(+)-(S,S)-DTT (approximately 5 mg). Crystallization typically began within 5-10 minutes after seeding. After 2 h at 40 C., the temperature of the solution was lowered to 20 C. over 2 h, and the solution was held at this temperature for a further 1 h. The product was then separated by filtration, washed with the appropriate solvent (2¡Á20 mL) and dried overnight at 60 C. under reduced pressure.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 103146-25-4.

Reference:
Patent; H. Lundbeck A/S; US2009/69582; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Some common heterocyclic compound, 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, molecular formula is C20H23FN2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 103146-25-4

Oxalate [(+-)-Diol Oxalate Salt] (+-)-Diol compound (VI) (7 g, 0.0205 mol) and oxalic acid dihydrate (2.83 g, 0.0225 ml) were added to isopropyl alcohol (77 ml) and heated the contents to 75-80 C. to obtain a clear solution. The obtained solution was cooled to 10-15 C. and stirred for 2 h to complete the crystallization. The product was filtered, and thereafter dried at 50-60 C. under reduced pressure for 6 h to give 8.6 g of diol oxalate salt (VIa), with HPLC purity of 99.94%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 103146-25-4, its application will become more common.

Reference:
Patent; Kaushik, Vipin Kumar; Mohammed, Umar Khan; Meenakshisunderam, Sivakumaran; US2009/99375; (2009); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, A new synthetic method of this compound is introduced below., 103146-25-4

To a stirred solution [OF RACEMIC 4- [4-DIMETHYLAMINO-1- (4-FLUORO-PHENYL)-1-HYDROXY-] [BUTYL]-3-HYDROXYMETHYL-BENZONITRILE] (0,29 mmol, 100 mg) and vinylbutyrate (0,29 mmol, [37 L)] in anhydrous toluene (2,925 ml) is added Novozymes 435, (0,2 mg) and 1,1 eq. Carboxylic acid. The reaction is heated to 40 degrees celcius and followed by HPLC. The enzyme is filtered off and washed with a small amount of toluene. The combined organic phases are evaporated in vacuo and subsequently analyzed on super critical fluid chromatography. Result is shown in table 19.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; H. LUNDBECK A/S; WO2004/14821; (2004); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

103146-25-4, Name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, 103146-25-4, belongs to nitriles-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows.

50 gm of 5-Cyano phthalide was stirred in 150 ml of THF at -5C. 227 gm of l-(4-fluorophenyl) magnesium bromide was added to the above solution and stirred for about 15 minutes at -5 0C. 324 gm of l-[3- (dimethylamino) propyl] magnesium chloride was added slowly to the reaction mass at -5 0C and then stirred for about 30 minutes at room temperature. The reaction mixture was quenched into cold water (650 ml). Reaction mixture pH was adjusted to about 2 with 36% aqueous HCl (94 ml) and washed the reaction mixture with toluene (2 X 150 ml). The aqueous layer was separated, toluene (300 ml) was added and pH was adjusted to about 7.5 with aqueous ammonia (45 ml). The organic layer was separated and aqueous layer was extracted with toluene (1 X 200 ml; IX 100 ml). Total organic layer was washed with water (1 X 250 ml) followed by salt solution (1 X 250 ml). The final organic layer was distilled completely under vacuum to get 76 gm of residue.The residue obtained above was charged in 150 ml of toluene, stirred at room temperature for about 1 hour. The solution was cooled to 10-150C and stirred for about 1 hour. The solid was filtered and washed with toluene. The wet solid was dried to get 55 gm of the title compound as crystalline Form S.The obtained product was analyzed by DSC and XRD, the results are as provided in Fig. 1 & 2 respectively.

Statistics shows that 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile is playing an increasingly important role. we look forward to future research findings about 103146-25-4.

Reference:
Patent; SHODHANA LABORATORIES LIMITED; GIRIDHAR, Thota; SRINIVASULU, Gudipati; SRINIVASA RAO, Kotaru; WO2010/4575; (2010); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

A common heterocyclic compound, 103146-25-4, name is 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile, molecular formula is C20H23FN2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 103146-25-4.

Example 2 (Preparation of the mixture used in example 1) (S)-4-[4-Dimethylamino-1-(4′-fluorophenyl)-1-hydroxybutyl]-3-hydroxymethyl- benzonitrile To a stirred solution of racemic 4- [4-Dimethylamino-l- (4-fluorophenyl)-l-hydroxy- butyl] -3-hydroxymethylbenzonitrile (29 mmol, 10 g) and vinylbutyrate (58 mmol, 7,5 ml) in anhydrous 1,4-dioxane (142,5 ml) is added lipoprotein lipase pseudomonas sp. (160 U, 250 mg). The reaction is heated to 50 C and followed by HPLC. After 192 hours at a conversion of 41%, additional 250 mg lipase was added. After 504 hours, at a conversion of 63 % the reaction was stopped. The enzyme is filtered off and washed with a small amount of 1,4-dioxane. The combined organic phases are evaporated in vacuo and subsequently analyzed on super critical fluid chromatography. Obtained ee-value ( (S-diol) = 95% (S-diol/R-diol = 40: 1).

The synthetic route of 4-(4-(Dimethylamino)-1-(4-fluorophenyl)-1-hydroxybutyl)-3-(hydroxymethyl)benzonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Patent; H. LUNDBECK A/S; WO2005/77891; (2005); A1;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts