Category: 100-70-9

Walden, Melissa T. published the artcileHomoleptic platinum(II) complexes with pyridyltriazole ligands: excimer-forming phosphorescent emitters for solution-processed OLEDs, Category: nitriles-buliding-blocks, the main research area is platinum complex pyridyltriazole ligand phosphorescent emitter OLED solution processing.

Two new homoleptic platinum(II) complexes are reported that feature aryl-appended 5-(2-pyridyl)-1,2,4-triazole chelates acting as NN̂- ligating ions, PtL12 and PtL22. Readily prepared from easily accessible proligands, they offer good solubility in organic solvents, allowing them to be incorporated into OLEDs through solution processing. Crystal structures reveal staggered, face-to-face packing of the π systems in adjacent complexes, but with no close Pt···Pt interactions. The complexes display bright unimol. phosphorescence: for PtL12 and PtL22 resp., λmax = 502 and 514 nm; Φ = 0.21 and 0.48; τ = 5.1 and 4.6 μs in deoxygenated CH2Cl2 at 295 K. Both complexes show a strong propensity to form intensely emissive excimers at higher concentrations: λmax = 585 and 625 nm for PtL12 and PtL22. The photophys. properties in doped and neat thin films have been investigated using steady-state and time-resolved methods. These studies highlight the presence of different environments of bimol. excited states with different lifetimes, those emitting at lowest energy apparently having the longest lifetimes, contrary to what is normally found for unimol. emitters through the effects of vibrational deactivation. The prototype solution-processed OLEDs gave EQEs of 9.6-12.5% for PtL12 and 8.8-11.4% for PtL22, impressive values for solution-processed devices incorporating such simple complexes and only a little inferior to the EQE of 15% achieved using PtL12 in a device prepared by evaporation Compounds of this type have potential to provide the red and green components for white light OLEDs, due to their tunable, uni- and bimol. excited state emission.

Journal of Materials Chemistry C: Materials for Optical and Electronic Devices published new progress about Bond angle. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Category: nitriles-buliding-blocks.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Vogt, Natalja published the artcileThe equilibrium molecular structure of 2-cyanopyridine from combined analysis of gas-phase electron diffraction and microwave data and results of ab-initio calculations, Synthetic Route of 100-70-9, the main research area is cyanopyridine electron diffraction microwave rotational constant equilibrium mol structure.

The gas-phase electron diffraction study of 2-cyanopyridine was carried out for the first time. Results of ab-initio structure calculations performed at the CCSD(T) level of theory agree well with the equilibrium structure determined by the electron diffraction method in combination with vibrational spectroscopy data and microwave rotational constants The deviations between them are only a few thousandths of Å units and a few tenths of degree in the bond lengths and bond angles, resp. The structure in the solid state is more different from that in the gas phase. The observed discrepancies between these structures are up to 0.02 Å and 2° in the bond lengths and bond angles, resp. The influence of the ortho-, meta- and para-cyano substituents on the geometry of pyridine ring is discussed. The pyridine ring is noticeably distorted due to cyano substituents. The Cipso-N and/or Cipso-C bond lengths are elongated both in 2-CNP and 4-CNP by 0.004 Å in comparison to those in pyridine, whereas the Cipso-C bond lengths are increased by 0.005 and 0.009 Å in 3-CNP.

Structural Chemistry published new progress about Bond angle. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Synthetic Route of 100-70-9.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Gong, Zi-Jie published the artcileDirect copolymerization of carbon dioxide and 1,4-butanediol enhanced by ceria nanorod catalyst, Safety of Picolinonitrile, the main research area is carbon dioxide butanediol direct copolymerization ceria nanorod catalyst.

Direct copolymerization of CO2 and 1,4-butanediol to yield poly(butylene carbonate) oligomers has been recently realized using CeO2 as a catalyst and 2-cyanopyridine as a dehydrating agent. In this study, CeO2 nanorod and nanocube were synthesized, characterized, and compared their catalytic activities with com. CeO2 nanoparticle and submicronparticle. Reaction testing reveals that CeO2 nanorod exhibits a much higher yield of polycarbonate oligomer than other CeO2 catalysts. Surface characterizations indicate that CeO2 nanorod displays a significantly higher CO2 uptake and stronger interactions with CO2, properties that could be beneficial to activate stable CO2 mol. In-situ IR spectroscopy suggests that bidentate carbonate, i.e., CO2 adsorbs over the CeO2 surface with an oxygen atom and an oxygen vacancy coordinated with a cerium atom, is the key intermediate associated with the observed catalytic activities. These results manifest the importance of surface oxygen vacancy of CeO2 for activating CO2 to proceed non-reductive conversion.

Applied Catalysis, B: Environmental published new progress about Grain size. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Safety of Picolinonitrile.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Wimmer, Eric published the artcileAn autonomous self-optimizing flow machine for the synthesis of pyridine-oxazoline (PyOX) ligands, Recommanded Product: Picolinonitrile, the main research area is pyridine oxazoline ligand self optimizing flow machine.

Pyridine-oxazoline-type ligands (PyOX) are an important class of chiral ligands for metal-catalyzed asym. transformations. Herein we describe an efficient and reliable flow route which is amenable for the synthesis of PyOX ligands at a scale of hundreds of milligrams per h. Optimal flow conditions were rapidly identified through the assistance of an inhouse built autonomous self-optimizing system integrating a custom-made optimization algorithm derived from the Nelder-Mead and golden section search methods. The preparation of a small library of representative PyOX ligands highlights the practical application of this flow route which should be of primary interest for synthetic chemists developing metal-catalyzed asym. transformations.

Reaction Chemistry & Engineering published new progress about Algorithm. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Recommanded Product: Picolinonitrile.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Tak, Raj K. published the artcileLigand-enabled, copper-catalyzed electrophilic amination for the asymmetric synthesis of β-amino acids, Application In Synthesis of 100-70-9, the main research area is amino acid beta cyclic linear enantioselective synthesis solvent effect; electrophilic amination copper catalyst isoxazolidinone nitrene; asym desymmetrization kinetic resolution nitrene transfer.

Catalytic asym. nitrene transfer has emerged as a reliable method for the synthesis of nitrogen-containing chiral compounds Herein, we report the copper-catalyzed intramol. asym. electrophilic amination of aromatic rings. The reactive intermediate is a copper-alkyl nitrene generated from isoxazolidin-5-ones. Copper catalysis promotes three classes of asym. transformations, namely, asym. desymmetrization, parallel kinetic resolution, and kinetic resolution, expanding the repertoire of alkyl nitrene transfer and providing various cyclic and linear β-amino acids in their enantioenriched forms.

Organic Letters published new progress about Amination. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Application In Synthesis of 100-70-9.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Alvarez-Bermudez, Olaia published the artcileMagnetically enhanced polymersupported ceria nanocatalysts for the hydration of nitriles, Quality Control of 100-70-9, the main research area is magnetite nitrile polystyrene ceria nanocatalyst hydration heterogeneous catalysis.

The heterogeneous catalysis of the hydration of nitriles to amides is a process of great industrial relevance in which cerium(IV) oxide (also referred to as ceria) has shown an outstanding catalytic performance. The use of non-supported ceria nanoparticles is related to difficulties in the purification of the product and the recovery and recyclability of the catalyst. Therefore, in this work, ceria nanoparticles are supported on a polymer matrix either by synthesizing polymer particles by so-called Pickering miniemulsions while using ceria nanoparticles as emulsion stabilizers or, as a comparison, by in-situ crystallization on preformed polymer particles. The former strategy presents significant advantages over the latter in terms of time and consumption of resources, and it facilitates an easier scale-up of the process. In both strategies, the incorporation of a magnetoresponsive core within the polymer matrix allows the recovery and the recycling of the catalyst by simple application of a magnetic field and offers an enhancement of the catalytic efficiency.

Nanotechnology published new progress about Adsorption. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Quality Control of 100-70-9.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Tamura, Masazumi published the artcileOrganic compound modification of CeO2 and 2-cyanopyridine hybrid catalyst in carbonate synthesis from CO2 and alcohols, Product Details of C6H4N2, the main research area is cerium oxide carbon dioxide surface modification dialkyl carbonate.

The effect of surface modification of CeO2 and 2-cyanopyridine hybrid catalyst with organic compounds was investigated by using dialkyl carbonate synthesis from CO2 and alcs. Phenol is the useful modifier for CeO2 and 2-cyanopyridine hybrid catalyst without drastic decrease of the activity. Based on the characterizations of phenol-modified CeO2 and 2-cyanopyridine hybrid catalyst such as TG-DTA, GC, FTIR and UV-vis, phenol and 2-cyanopyridine were adsorbed on CeO2 at the same time and the adsorption ratio to the surface Ce on CeO2 is estimated to be 0.11 and 0.12, resp. (2-cyanopyridine/Ce on CeO2 surface = 0.12, phenol/Ce on CeO2 surface = 0.11). The reactivity of alcs. was changed by the addition of phenol due to the steric hindrance of phenol adsorbed on CeO2. The effect of the steric hindrance was large at the C2 and C3 positions of alcs., which corresponds to the C2 and C3 positions of phenol. The reactivity was drastically decreased in the cases of C2 position-branched alcs. compared with the case without phenol addition, and the yield ratio (The yield without phenol/the yield with phenol) increased: 61 in the case of 2-ethyl-1-butanol, 9.9 in the case of 2-methyl-1-butanol, and 3.7 in the case of 1-butanol. From the DFT calculations, phenol is adsorbed nearby 2-cyanopyridine adspecies by the p-p interaction between the aromatic rings of these chems. to decrease the reaction space over CeO2, resulting in the reactivity decrease of the steric alcs., particularly the alcs. with substituents at the C2 position. Therefore, phenol can restrict the reaction field of CeO2 and 2-cyanopyridine hybrid catalyst by the steric hindrance, enabling the control of the reactivity of alcs. in the synthesis of dialkyl carbonates from CO2 and alcs.

Journal of CO2 Utilization published new progress about Adsorption. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Product Details of C6H4N2.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Enkelmann, Dennis published the artcileCyanopyridines – Suitable Heterocycles for Cocrystal Syntheses, HPLC of Formula: 100-70-9, the main research area is cyanopyridine dicarboxylic acid crystal structure hydrogen bond intramol potential.

2-Cyanopyridine and 4-cyanopyridine were investigated for the controlled synthesis of cocrystals by applying the pKa rule. Cocrystals were designed with oxalic, glutaric and adipic acids and analyzed by single crystal X-ray diffraction. To get a deeper insight into the aggregation behavior of the designed cocrystals, UNI Force Field Calculations were used to compare the intermol. potentials of the main interactions of the crystal structures.

European Journal of Inorganic Chemistry published new progress about Aggregates. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, HPLC of Formula: 100-70-9.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Zhou, Zhong published the artcileSilver-Catalyzed Cross Dehydrogenative Coupling between Heteroarenes and Cyclic Ethers under Mild Conditions, COA of Formula: C6H4N2, the main research area is hereroaryl cyclic ether preparation; heteroarene cyclic ether cross dehydrogenative coupling silver catalyst.

A new strategy for the straightforward alkylation of heteroarenes (such as 2-phenylpyridine, 2-methylquinoline, 6-bromo-isoquinoline, etc.) under mild conditions was developed. Silver catalyst was employed for the cross dehydrogenative coupling between heteroarenes and cyclic ethers (such as THF, tetrahydropyran, [1,4]dioxane, [1,3]dioxolane) to construct a new C(sp2)-C(sp3) bond. This reaction was carried out in water under room temperature and applicable to various heteroarenes such as pyridines, quinolines and isoquinolines derivatives with good functional group compatibility.

ChemistrySelect published new progress about Alkylation. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, COA of Formula: C6H4N2.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Garcia-Vazquez, Rocio published the artcileDevelopment of 18F-labeled bispyridyl tetrazines for in vivo pretargeted PET imaging, Quality Control of 100-70-9, the main research area is bispyridyl tetrazines PET imaging nucleophilic substitution; PET; bioorthogonal chemistry; bispyridyl tetrazines; fluorine-18; molecular imaging; pretargeted imaging; tetrazine ligation.

Pretargeted PET imaging is an emerging and fast-developing method to monitor immuno-oncol. strategies. Currently, tetrazine ligation is considered the most promising bioorthogonal reaction for pretargeting in vivo. Recently, we have developed a method to 18F-label ultrareactive tetrazines by copper-mediated fluorinations. However, bispyridyl tetrazines-one of the most promising structures for in vivo pretargeted applications-were inaccessible using this strategy. We believed that our successful efforts to 18F-label H-tetrazines using low basic labeling conditions could also be used to label bispyridyl tetrazines via aliphatic nucleophilic substitution. Here, we report the first direct 18F-labeling of bispyridyl tetrazines, their optimization for in vivo use, as well as their successful application in pretargeted PET imaging. This strategy resulted in the design of [18F]45, which could be labeled in a satisfactorily radiochem. yield (RCY = 16%), molar activity (Am = 57 GBq/μmol), and high radiochem. purity (RCP > 98%). The [18F]45 displayed a target-to-background ratio comparable to previously successfully applied tracers for pretargeted imaging. This study showed that bispyridyl tetrazines can be developed into pretargeted imaging agents. These structures allow an easy chem. modification of 18F-labeled tetrazines, paving the road toward highly functionalized pretargeting tools. Moreover, bispyridyl tetrazines led to near-instant drug release of iTCO-tetrazine-based ′click-to-releaseâ€?reactions. Consequently, 18F-labeled bispyridyl tetrazines bear the possibility to quantify such release in vivo in the future.

Pharmaceuticals published new progress about Alkylation. 100-70-9 belongs to class nitriles-buliding-blocks, name is Picolinonitrile, and the molecular formula is C6H4N2, Quality Control of 100-70-9.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts