Month: September 2022

Nitrile is any organic compound with a −C≡N functional group. 20099-89-2, formula is C9H6BrNO, Name is 4-(2-Bromoacetyl)benzonitrile.The prefix cyano- is used interchangeably with the term nitrile in literature. Category: nitriles-buliding-blocks.

Chen, Liwei;Li, Renfu;Wang, Xinli;Wang, Zexin;Lin, Xiang;Yang, Lu;Yao, Yunpeng;Sun, Shitao;Li, Zhenli;Hao, Jinle;Lin, Bin;Chen, Xueyuan;Xie, Lijun research published 《 New Rofecoxib-Based Mechanochromic Luminescent Materials and Investigations on Their Aggregation-Induced Emission, Acidochromism, and LD-Specific Bioimaging》, the research content is summarized as follows. Development of new mechanochromic luminescent (MCL) materials from aggregation-induced emission luminogens (AIEgens) has attracted wide attention due to their potential application in multiple areas. However, rational design and crafting of new MCL materials from the simple AIEgens skeleton is still a big challenge because of the undesirable concentration quenching effect. In this study, we have constructed a new class of MCL materials by adding one Ph as a new rotator and incorporating one pair of electron donor (D) and acceptor (A) into the system of rofecoxib skeleton. This strategy endowed the compounds (Y1-Y8) with tunable emission behavior and some of them with the AIE effect and reversible MCL behavior. These properties may be caused by the highly twisted conformation and loosely mol. packing modes, which were elucidated clearly by analyzing the data of single-crystal X-ray diffraction, powder X-ray diffraction, and differential scanning calorimetry. Further investigation revealed that Y7 displayed acidochromic property due to the protonation of the nitrogen atom. Moreover, Y7, as a typical compound, showed its potential applications in the area of anticounterfeiting, pH sensor, and LD-specific bioimaging.

Category: nitriles-buliding-blocks, 4-(2-Bromoacetyl)benzonitrile, also known as 2-Bromo-4′ -cyanoacetophenone, is a useful research compound. Its molecular formula is C9H6BrNO and its molecular weight is 224.05 g/mol. The purity is usually 95%.
2-Bromo-4′ -cyanoacetophenone can be synthesized from ethylbenzene via aerobic photooxidation using aqueous HBr.
4-(2-Bromoacetyl)benzonitrile is useful for the irreversible inhibitory activity of Glycogen synthase kinase 3 (GSK-3). Phenylhalomethylketones can be used in the study of novel GSK-3 inhibitors., 20099-89-2.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Nitriles used to be known as cyanides; the smallest organic nitrile is ethanenitrile, CH3CN, (old name: methyl cyanide or acetonitrile – and sometimes now called ethanonitrile). 105-34-0, formula is C4H5NO2, Name is Methyl 2-cyanoacetate. Nitriles are found in many useful compounds, including methyl cyanoacrylate, used in super glue, and nitrile rubber, a nitrile-containing polymer used in latex-free laboratory and medical gloves. Quality Control of 105-34-0.

Chen, Huan;Rhoades, Charles C.;Chow, Alex T. research published 《 Characteristics of soil organic matter 14 years after a wildfire: A pyrolysis-gas-chromatography mass spectrometry (Py-GC-MS) study》, the research content is summarized as follows. Severe wildfires combust most above ground vegetation and detritus layers, altering the content and chem. composition of soil organic matter (SOM). To evaluate the lasting effects of wildfire on SOM and the recovery of burned soils, we sampled surface (Oa horizon) and mineral soils (0-5 and 5-15 cm depths) in unburned areas and areas burned at moderate and high severity 14 years after the 2002 Hayman Fire, in Colorado, USA. We characterized SOM using Pyrolysis Gas Chromatog. Mass Spectrometry (Py-GC-MS) and identified 106 pyrolyzates within eight chem. classes [aromatic hydrocarbon (ArH), carbohydrate (Carb), lignin compound (LgC), nitrogen containing compound (Ntg), polyaromatic hydrocarbon (PAH), phenol compound (PhC), saturated hydrocarbon (SaH), and unsaturated hydrocarbon (UnSaH)]. Burned soils had greater total quantified peak areas (TQPA) for the pyrogenic C indicator (PyC) benzene, compared to unburned soils; however, other common PyC markers were not abundant in burned relative to unburned soils. Factor anal. on the individual pyrolyzates suggests that factors 1 and 2 correlated with pyrolyzate aromaticity and hydrophobicity, resp. Sample factor scores potentially suggest that SOM aromaticity increases with fire severity, though difference between moderate and high severity was slight. Factor anal. also indicates that the ratio of [ArH + Ntg] / [PhC + LgC] may serve as index of PyC content in SOM. This study shows that wildfire effects on SOM character may persist for more than a decade of ecosystem recovery and that Py-GC-MS coupled with factor anal. has utility for evaluating how disturbance alters SOM and PyC in complex environments.

Quality Control of 105-34-0, Methyl cyanoacetate is an alkyl cyanoacetate ester.
Methyl cyanoacetate is the intermediate product in pharmaceutical organic synthesis as well as in the synthesis of some biologically active compounds used in agriculture. It undergoes calcite or fluorite catalyzed Knövenagel condensation with aromatic aldehydes, giving the corresponding arylidenemalononitriles and (E)-α -cyanocinnamic esters.
Methyl Cyanoacetate is often used as a nucleophile in the electrochemical oxidation of catechols. Methyl Cyanoacetate is also a reagent in the synthesis of Methyl 2-Amino-4-trifluoromethylthiophene-3-carboxylate (M287290); a compound used in the synthesis of DPP-IV inhibitors for treating type 2 diabetes., 105-34-0.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Nitrile groups in organic compounds can undergo a variety of reactions depending on the reactants or conditions. 3032-92-6, formula is C9H5N, Name is 4-Ethynylbenzonitrile. A nitrile group can be hydrolyzed, reduced, or ejected from a molecule as a cyanide ion. Product Details of C9H5N.

Chatterjee, Shrestha;Acharyya, Ranjan Kumar;Pal, Pratik;Nanda, Samik research published 《 Synthetic studies towards naturally occurring γ-(Z)/(E)-alkylidenebutenolides through bimetallic cascade cyclization and an adventitious photoisomerization method》, the research content is summarized as follows. A general and flexible visible light-induced photoisomerization method of γ-(Z)-alkylidenebutenolides to their corresponding E-components was reported in this article. Initially, a series of naturally occurring enantiopure γ-(Z)-alkylidenebutenolides was synthesized by employing a “Pd-Cu” bimetallic cascade cyclization protocol. In the later part, the synthesized γ-(Z)-alkylidenebutenolides were photoisomerized in the presence of a triplet photosensitizer to γ-(E)-alkylidenebutenolides in reasonably acceptable yields. Total synthesis of goniobutenolides, hygrophorones, ramariolide D, melodorinols/acetyl-melodorinols, versicolactones, and phomopsolidones was achieved by employing the developed methods.

3032-92-6, 4-Ethynylbenzonitrile is a simple benzyl alkyne compound potentially useful as a synthetic fragment and as a test compound for cross-coupling protocols. 4-Ethynylbenzonitrile has been described as a model compound for studying hydrogen bond formation in multifunctional molecules, as it contains four hydrogen bonding sites of which three are π-acceptors.

4-Ethynylbenzonitrile is a useful research compound. Its molecular formula is C9H5N and its molecular weight is 127.14 g/mol. The purity is usually 95%., Product Details of C9H5N

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Industrially, the main methods for producing nitriles are ammoxidation and hydrocyanation. 105-34-0, formula is C4H5NO2, Name is Methyl 2-cyanoacetate. Both routes are green in the sense that they do not generate stoichiometric amounts of salts. COA of Formula: C4H5NO2.

Charvet, Sylvain;Medebielle, Maurice;Vantourout, Julien C. research published 《 Mn-Mediated α-Radical Addition of Carbonyls to Olefins: Systematic Study, Scope, and Electrocatalysis》, the research content is summarized as follows. A systematic study of the manganese-mediated α-radical addition of carbonyl groups to olefins is presented. After an in-depth investigation of the parameters that govern the reaction, a first round of optimization allowed the development of a unified stoichiometric set of conditions, which were subsequently assessed during the exploration of the scope. Due to observed limitations, the knowledge accumulated during the initial study was reengaged to quickly optimize promising substrates that were so far inaccessible under previously reported conditions. Altogether these results led to the creation of a predictive model based on the pKa of the carbonyl compound and both the substitution and geometry of the alkene coupling partner. Finally, a departure from the use of stoichiometric manganese was enabled through the development of a robust and practical electrocatalytic version of the reaction.

105-34-0, Methyl cyanoacetate is an alkyl cyanoacetate ester.
Methyl cyanoacetate is the intermediate product in pharmaceutical organic synthesis as well as in the synthesis of some biologically active compounds used in agriculture. It undergoes calcite or fluorite catalyzed Knövenagel condensation with aromatic aldehydes, giving the corresponding arylidenemalononitriles and (E)-α -cyanocinnamic esters.
Methyl Cyanoacetate is often used as a nucleophile in the electrochemical oxidation of catechols. Methyl Cyanoacetate is also a reagent in the synthesis of Methyl 2-Amino-4-trifluoromethylthiophene-3-carboxylate (M287290); a compound used in the synthesis of DPP-IV inhibitors for treating type 2 diabetes., COA of Formula: C4H5NO2

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Nitrile is any organic compound with a −C≡N functional group. 1835-49-0, formula is C8F4N2, Name is Tetrafluoroterephthalonitrile.The prefix cyano- is used interchangeably with the term nitrile in literature. HPLC of Formula: 1835-49-0.

Chang, Siqi;Xie, Wei;Yao, Chan;Xu, Guangjuan;Zhang, Shuran;Xu, Yanhong research published 《 Preparation of covalent triazine frameworks with multiactive sites for efficient and reversible iodine capture》, the research content is summarized as follows. Covalent triazine skeletons (CTFs) are long-chain polymers with rigid hydrophobic aromatic skeletons and polar functional groups. Here, we selected three monomers to explore a series of stable CTFs (FCTFs, NCTFs, ClCTFs) with multiple active sites at 350 and 400°C resp., which can act as a porous platform for effective and reversible iodine capture. The iodine adsorption capacities of FCTF@350, NCTF@350, ClCTF@350, FCTF@400, NCTF@400 and ClCTF@400 are 285, 232, 231, 382, 372 and 340 wt%, resp. Among them, the iodine capture capacities of FCTFs and NCTFs are higher than those of ClCTFs, which suggested that the introduction of electron-rich F and pyridine N groups can indeed improve the iodine adsorption capacity of the polymers. In addition, at 50 bar and 323 K, the CO₂ capture capacity of FCTF@350, NCTF@350, ClCTF@350, FCTF@400, NCTF@400 and ClCTF@400 are 631.6, 539.2, 496.6, 876.6, 783.3, and 695.4 mg g^-1, resp. This shows that polymers have good applications in CO₂ capture.

1835-49-0, Tetrafluoroterephthalonitrile can react with alkyl grignard reagents to form 4-alkyltetraflurorobenzonitriles. It acts as a four electron donor ligand. Tetrafluoroterephthalonitrile can be used to synthesize polymers of intrinsic microporosity. It has been used to study UV rearranged polymers of teh PIM-1 type membrane for the efficient separation of H2 and CO2.
Tetrafluoroterephthalonitrile reacts with alkyl Grignard reagents to form corresponding 4-alkyltetrafluorobenzonitriles. Tetrafluoroterephthalonitrile acts as a four-electron donor ligand and forms tungsten(II)η 2-nitrile complexes.
Tetrafluoroterephthalonitrile is a hydroxyl group-containing organic chemical compound . It has been used in analytical chemistry as a reagent for the determination of peptide binding constants and disulfide bonds. Tetrafluoroterephthalonitrile binds to nucleophilic sites on proteins, such as the pim-1 protein, and can be used to transport other molecules across cell membranes. In addition, it has been used to produce polymers for use in analytical chemistry. This chemical is also able to bind with magnetic particles under constant pressure conditions, which makes it useful for optical sensor applications. , HPLC of Formula: 1835-49-0

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Nitriles used to be known as cyanides; the smallest organic nitrile is ethanenitrile, CH3CN, (old name: methyl cyanide or acetonitrile – and sometimes now called ethanonitrile). 31643-49-9, formula is C8H3N3O2, Name is 4-Nitrophthalonitrile. Nitriles are found in many useful compounds, including methyl cyanoacrylate, used in super glue, and nitrile rubber, a nitrile-containing polymer used in latex-free laboratory and medical gloves. HPLC of Formula: 31643-49-9.

Cavus, Aleyna;Gork, Gulsen;Erdem, Murat;Ozer, Metin research published 《 Synthesis and characterization of the novel 4-(1-(pyridin-4-yl) ethoxyl) substituted bis(phthalocyaninato) rare earth complexes and investigation of their two-photon absorption-based third-order non-linear optical properties》, the research content is summarized as follows. Novel 4-(1-(pyridin-4-yl) ethoxyl) substituted double-decker rare earth phthalocyanine complexes were synthesized starting from (R)-4-(1-(pyridin-4-yl) ethoxy) phthalonitrile with proper rare earth metal acetates in octanol catalyzed by 1,8-diazabicyclo[5.4.0]undec-7-ene at 300°C. The new starting phthalonitrile compound was obtained from (R)-1-(pyridin-4-yl) ethan-1-ol and 4-nitrophthalonitrile in acetonitrile at reflux temperature in the presence of potassium carbonate as a catalyst. The characterization of the synthesized and isolated compounds was performed by elemental anal., IR, UV-visible, proton and correlation spectroscopy NMR, and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopic methods. Nonlinear optical responses of all complexes are investigated using the Z-scan method. The nonlinear absorption coefficient, two-photon absorption cross-section, and the imaginary part of the nonlinear susceptibility of complexes are calculated for each discrete concentration All these nonlinear parameters of our rare-earth coordinated double-decker phthalocyanines present a decrement due to the aggregation under high optic powers, which result in sequential two-photon absorption for smaller ionic radii.

31643-49-9, 4-Nitrophthalonitrile, also known as 4-Nitrophthalonitrile, is a useful research compound. Its molecular formula is C8H3N3O2 and its molecular weight is 173.13 g/mol. The purity is usually > 95%.
4-Nitrophthalonitrile is a chemical substance that can be synthesized by the reaction of sodium carbonate with 3,4,5-trimethoxybenzyl alcohol. It can also be prepared using nitro phenol and sodium hydroxide. 4-Nitrophthalonitrile has been shown to have high photochemical activity in the presence of light. The frequency shift of its infrared spectrum is indicative of a nucleophilic addition reaction mechanism. 4-Nitrophthalonitrile has been used as an intermediate for producing other chemicals, such as herbicides and pharmaceuticals., HPLC of Formula: 31643-49-9

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Nitriles are found in many useful compounds. Nitrile rubber is also widely used as automotive and other seals since it is resistant to fuels and oils. Organic compounds containing multiple nitrile groups are known as cyanocarbons. 105-34-0, formula is C4H5NO2, Name is Methyl 2-cyanoacetate. Nitriles are found in many useful compounds. One of the most common occurrences of nitriles is in Nitrile rubber. Electric Literature of 105-34-0.

Carreira, M. Carolina A.;Oliveira, M. Conceicao;Fernandes, Ana C. research published 《 One-pot sustainable synthesis of valuable nitrogen compounds from biomass resources》, the research content is summarized as follows. A new one-pot process for sustainable synthesis of 2-furanylquinazolines and 2-furfurylidene derivatives from carbohydrates, including xylose, fructose and xylan, with moderate overall yields, catalyzed by perrhenic acid was reported.

105-34-0, Methyl cyanoacetate is an alkyl cyanoacetate ester.
Methyl cyanoacetate is the intermediate product in pharmaceutical organic synthesis as well as in the synthesis of some biologically active compounds used in agriculture. It undergoes calcite or fluorite catalyzed Knövenagel condensation with aromatic aldehydes, giving the corresponding arylidenemalononitriles and (E)-α -cyanocinnamic esters.
Methyl Cyanoacetate is often used as a nucleophile in the electrochemical oxidation of catechols. Methyl Cyanoacetate is also a reagent in the synthesis of Methyl 2-Amino-4-trifluoromethylthiophene-3-carboxylate (M287290); a compound used in the synthesis of DPP-IV inhibitors for treating type 2 diabetes., Electric Literature of 105-34-0

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Inorganic compounds containing the −C≡N group are not called nitriles, but cyanides instead.1835-49-0, formula is C8F4N2, Name is Tetrafluoroterephthalonitrile. Though both nitriles and cyanides can be derived from cyanide salts, most nitriles are not nearly as toxic. Recommanded Product: Tetrafluoroterephthalonitrile.

Carja, Ionela-Daniela;Tavares, Sergio Rodrigues;Shekhah, Osama;Ozcan, Aydin;Semino, Rocio;Kale, Vinayak S.;Eddaoudi, Mohamed;Maurin, Guillaume research published 《 Insights into the Enhancement of MOF/Polymer Adhesion in Mixed-Matrix Membranes via Polymer Functionalization》, the research content is summarized as follows. MOF-based mixed-matrix membranes (MMMs) prepared using standard routes often exhibit poor adhesion between polymers and MOFs. Herein, we report an unprecedented systematic exploration on polymer functionalization as the key to achieving defect-free MMMs. As a case study, we explored computationally MMMs based on the combination of the prototypical UiO-66(Zr) MOF with polymer of intrinsic porosity-1 (PIM-1) functionalized with various groups including amidoxime, tetrazole, and N-((2-ethanolamino)ethyl)carboxamide. Distinctly, the amidoxime-derivative PIM-1/UiO-66(Zr) MMM was predicted to express the desired enhanced MOF/polymer interfacial interactions and thus subsequently prepared and evaluated exptl. Prominently, high-resolution transmission electron microscopy confirmed optimal adhesion between the two components in contrast to the nanometer-sized voids/defects shown by the pristine PIM-1/UiO-66(Zr) MMM. Notably, single-gas permeation measurements further corroborated the need of optimal MOF/polymer adhesion in order to effectively enable the MOF to play a role in the gas transport of the resulting MMM.

Recommanded Product: Tetrafluoroterephthalonitrile, Tetrafluoroterephthalonitrile can react with alkyl grignard reagents to form 4-alkyltetraflurorobenzonitriles. It acts as a four electron donor ligand. Tetrafluoroterephthalonitrile can be used to synthesize polymers of intrinsic microporosity. It has been used to study UV rearranged polymers of teh PIM-1 type membrane for the efficient separation of H2 and CO2.
Tetrafluoroterephthalonitrile reacts with alkyl Grignard reagents to form corresponding 4-alkyltetrafluorobenzonitriles. Tetrafluoroterephthalonitrile acts as a four-electron donor ligand and forms tungsten(II)η 2-nitrile complexes.
Tetrafluoroterephthalonitrile is a hydroxyl group-containing organic chemical compound . It has been used in analytical chemistry as a reagent for the determination of peptide binding constants and disulfide bonds. Tetrafluoroterephthalonitrile binds to nucleophilic sites on proteins, such as the pim-1 protein, and can be used to transport other molecules across cell membranes. In addition, it has been used to produce polymers for use in analytical chemistry. This chemical is also able to bind with magnetic particles under constant pressure conditions, which makes it useful for optical sensor applications. , 1835-49-0.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Nitriles are found in many useful compounds. Nitrile rubber is also widely used as automotive and other seals since it is resistant to fuels and oils. Organic compounds containing multiple nitrile groups are known as cyanocarbons. 1835-49-0, formula is C8F4N2, Name is Tetrafluoroterephthalonitrile. Nitriles are found in many useful compounds. One of the most common occurrences of nitriles is in Nitrile rubber. Application of C8F4N2.

Caliskan, Esra;Shishatskiy, Sergey;Neumann, Silvio;Abetz, Volker;Filiz, Volkan research published 《 Investigation of the Side Chain Effect on Gas and Water Vapor Transport Properties of Anthracene-Maleimide Based Polymers of Intrinsic Microporosity》, the research content is summarized as follows. In the present work, a set of anthracene maleimide monomers with different aliphatic side groups obtained by Diels Alder reactions were used as precursors for a series of polymers of intrinsic microporosity (PIM) based homo- and copolymers that were successfully synthesized and characterized. Polymers with different sizes and shapes of aliphatic side groups were characterized by size-exclusion chromatog. (SEC), (NMR) ¹H-NMR, thermogravimetric (TG) anal. coupled with Fourier-Transform-IR (FTIR) spectroscopy (TG-FTIR) and d. measurements. The TG-FTIR measurement of the monomer-containing Me side group revealed that the maleimide group decomposes prior to the anthracene backbone. Thermal treatment of homopolymer methyl-100 thick film was conducted to establish retro-Diels Alder rearrangement of the homopolymer. Gas and water vapor transport properties of homopolymers and copolymers were investigated by time-lag measurements. Homopolymers with bulky side groups (i-propyl-100 and t-butyl-100) experienced a strong impact of these side groups in fractional free volume (FFV) and penetrant permeability, compared to the homopolymers with linear alkyl side chains. The effect of anthracene maleimide derivatives with a variety of aliphatic side groups on water vapor transport is discussed. The maleimide moiety increased the water affinity of the homopolymers. Phenyl-100 exhibited a high water solubility, which is related to a higher amount of aromatic rings in the polymer. Copolymers (methyl-50 and t-butyl-50) showed higher CO₂ and CH₄ permeability compared to PIM-1. In summary, the introduction of bulky substituents increased free volume and permeability while the maleimide moiety enhanced the water vapor affinity of the polymers.

Application of C8F4N2, Tetrafluoroterephthalonitrile can react with alkyl grignard reagents to form 4-alkyltetraflurorobenzonitriles. It acts as a four electron donor ligand. Tetrafluoroterephthalonitrile can be used to synthesize polymers of intrinsic microporosity. It has been used to study UV rearranged polymers of teh PIM-1 type membrane for the efficient separation of H2 and CO2.
Tetrafluoroterephthalonitrile reacts with alkyl Grignard reagents to form corresponding 4-alkyltetrafluorobenzonitriles. Tetrafluoroterephthalonitrile acts as a four-electron donor ligand and forms tungsten(II)η 2-nitrile complexes.
Tetrafluoroterephthalonitrile is a hydroxyl group-containing organic chemical compound . It has been used in analytical chemistry as a reagent for the determination of peptide binding constants and disulfide bonds. Tetrafluoroterephthalonitrile binds to nucleophilic sites on proteins, such as the pim-1 protein, and can be used to transport other molecules across cell membranes. In addition, it has been used to produce polymers for use in analytical chemistry. This chemical is also able to bind with magnetic particles under constant pressure conditions, which makes it useful for optical sensor applications. , 1835-49-0.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts

Industrially, the main methods for producing nitriles are ammoxidation and hydrocyanation. 3032-92-6, formula is C9H5N, Name is 4-Ethynylbenzonitrile. Both routes are green in the sense that they do not generate stoichiometric amounts of salts. Application In Synthesis of 3032-92-6.

Cai, Chen;Lu, Yi;Yuan, Chengcheng;Fang, Zheng;Yang, Xiaobing;Liu, Chengkou;Guo, Kai research published 《 Metal-Free C-C Cross Coupling: Electrosynthesis of Azaheterocycles through Anodic Oxidation Cyclization of 1,6-Enynes》, the research content is summarized as follows. A straightforward synthesis of azaheterocycles has been developed through electrochem. aerobic oxidation cyclization using a user-friendly undivided electrolytic cell at room temperature under catalyst-free conditions. This green and practical electrosynthesis strategy features good functional group, diverse electronic and steric properties tolerance. Based on a series of mechanistic investigation, including isotope labeling, singlet oxygen inhibiting, superoxide radical anion inhibiting, radical-trapping, cyclic voltammetry and controlled potential electrolysis experiments, a possible N-centered radical-initiated mechanism was proposed.

Application In Synthesis of 3032-92-6, 4-Ethynylbenzonitrile is a simple benzyl alkyne compound potentially useful as a synthetic fragment and as a test compound for cross-coupling protocols. 4-Ethynylbenzonitrile has been described as a model compound for studying hydrogen bond formation in multifunctional molecules, as it contains four hydrogen bonding sites of which three are π-acceptors.

4-Ethynylbenzonitrile is a useful research compound. Its molecular formula is C9H5N and its molecular weight is 127.14 g/mol. The purity is usually 95%., 3032-92-6.

Referemce:
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts