Application of 1835-49-0

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Tetrafluoroterephthalonitrile, and friends who are interested can also refer to it.

Adding a certain compound to certain chemical reactions, such as: 1835-49-0, name is Tetrafluoroterephthalonitrile, belongs to nitriles-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1835-49-0, SDS of cas: 1835-49-0

[Comparative Example 1]; The same operations as in Example 1 were carried out, except that the amount of the catalyst used was changed from 0.25 g to 0.05 g on a dry weight basis. After a lapse of 7.0 hours, absorption of hydrogen ceased. The quantity of hydrogen absorbed was 83% of the theoretical quantity of hydrogen absorbed. Treatment of the reaction solution was carried out in the same manner as in Example 1. EPO From the toluene extract, a small amount of a sample was withdrawn, and it was subjected to GC analysis. As a result of the analysis, the tetrafluoroterephthalonitrile as a raw material remained in an amount of 21.0 mol%, and tetrafluoroterephthalaldehyde was obtained in an amount of only 5.0 mol%. The amount of 2, 3, 5, 6-tetrafluorobenzene was 0.65 mol%, the amount of 2,3,5,6- tetrafluorobenzonitrile was 0.53 mol%, and 1-cyano- 2, 3, 5, 6-tetrafluorobenzaldehyde wherein a nitrile group on only one side had reacted was obtained in an amount of 63.1 mol%. On the other hand, the aqueous phase was neutralized and then subjected to GC analysis. As a result of the analysis, presence of 2.88 mol% of 2,3,5,6- tetrafluorobenzylamine was confirmed. The results are set forth in Table 2.; [Comparative Example 3]; The same operations as in Example 1 were carried out, except that the amount of sulfuric acid used was changed from 20.6 g to 5.15 g (50 mmol). After a lapse of 4.2 hours, absorption of hydrogen ceased. The quantity of hydrogen absorbed was 47% of the theoretical quantity of hydrogen absorbed. Treatment of the reaction solution was carried out in the same manner as in Example 1.From the toluene extract, a small amount of a sample was withdrawn, and it was subjected to GC analysis. As a result of the analysis, a peak of the tetrafluoroterephthalonitrile as a raw material was below EPO the detection limit, and tetrafluoroterephthalaldehyde was obtained in an amount of only 14.5 mol%. The amount of 2, 3, 5, 6-tetrafluorobenzene was 0.81 mol%, the amount of 2, 3, 5, 6-tetrafluorobenzonitrile was 0.67 mol%, and 1- cyano-2, 3, 5, 6-tetrafluorobenzaldehyde wherein a nitrile group on only one side had reacted was obtained in an amount of 54.0 mol%. On the other hand, the aqueous phase was neutralized and then subjected to GC analysis. As a result of the analysis, presence of 0.04 mol% of 2,3,5,6- tetrafluorobenzylamine was confirmed. The results are set forth in Table 2.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Tetrafluoroterephthalonitrile, and friends who are interested can also refer to it.

Reference:
Patent; SHOWA DENKO K.K.; WO2006/137347; (2006); A2;,
Nitrile – Wikipedia,
Nitriles – Chemistry LibreTexts